[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.10.73 (vagrant@vagrant-ubuntu-trusty-64) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 PREEMPT Fri Jun 30 01:13:36 UTC 2017 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Ambarella S2L (Flattened Device Tree), model: Ambarella S2LM Kiwi Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Ambarella: AHB = 0xe0000000[0xe0000000],0x01000000 0 [ 0.000000] Ambarella: APB = 0xe8000000[0xe8000000],0x01000000 0 [ 0.000000] Ambarella: PPM = 0x00000000[0xdfe00000],0x00200000 9 [ 0.000000] Ambarella: AXI = 0xf0000000[0xf0000000],0x00030000 0 [ 0.000000] Ambarella: DRAMC = 0xdffe0000[0xef000000],0x00020000 0 [ 0.000000] Ambarella: DBGBUS = 0xec000000[0xec000000],0x00200000 0 [ 0.000000] Ambarella: DBGFMEM = 0xee000000[0xee000000],0x01000000 0 [ 0.000000] Ambarella: IAVMEM = 0x09000000[ ],0x07000000 [ 0.000000] Ambarella: FBMEM = 0x09000000[ ],0x00000000 [ 0.000000] On node 0 totalpages: 36352 [ 0.000000] free_area_init_node: node 0, pgdat 805bf12c, node_mem_map 805f7000 [ 0.000000] Normal zone: 284 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 36352 pages, LIFO batch:7 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 36068 [ 0.000000] Kernel command line: ubi.mtd=bak root=ubi0:rootfs rw rootfstype=ubifs init=/linuxrc [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 142MB = 142MB total [ 0.000000] Memory: 137872k/137872k available, 7536k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0x89000000 - 0xff000000 (1888 MB) lowmem : 0x80000000 - 0x88e00000 ( 142 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x805564f4 (5434 kB) .init : 0x80557000 - 0x8057d7a4 ( 154 kB) .data : 0x8057e000 - 0x805c7628 ( 294 kB) .bss : 0x805c7628 - 0x805f2c34 ( 174 kB) [ 0.000000] NR_IRQS:240 [ 0.000000] sched_clock: 32 bits at 54MHz, resolution 18ns, wraps every 79536ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000838] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.059935] pid_max: default: 32768 minimum: 301 [ 0.060067] Mount-cache hash table entries: 512 [ 0.062879] CPU: Testing write buffer coherency: ok [ 0.063213] Setting up static identity map for 0x803f7d90 - 0x803f7df8 [ 0.065730] devtmpfs: initialized [ 0.067040] pinctrl core: initialized pinctrl subsystem [ 0.067301] NET: Registered protocol family 16 [ 0.068093] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.068621] Ambarella power management: Wed Aug 10 2016 [ 0.068683] L310 cache controller enabled [ 0.068707] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32020000, Cache size: 131072 B [ 0.070358] ambarella-pinctrl e8009000.pinctrl: Ambarella pinctrl driver registered [ 0.070765] ambarella-gpio gpio.0: Ambarella GPIO driver registered [ 0.074836] bio: create slab at 0 [ 0.075918] ambarella-dma e0005000.dma: Ambarella DMA Engine [ 0.076368] SCSI subsystem initialized [ 0.076613] usbcore: registered new interface driver usbfs [ 0.076683] usbcore: registered new interface driver hub [ 0.076865] usbcore: registered new device driver usb [ 0.078043] ambarella-i2c e8003000.i2c: Ambarella I2C adapter[0] probed! [ 0.078640] ambarella-i2c e8007000.i2c: Ambarella I2C adapter[2] probed! [ 0.079672] cfg80211: Calling CRDA to update world regulatory domain [ 0.079748] cfg80211: World regulatory domain updated: [ 0.079770] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.079798] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm) [ 0.079824] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 0.079849] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 0.079873] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 0.079896] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 0.079921] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm) [ 0.080028] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 0.080060] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 0.080655] Switching to clocksource ambarella-cs-timer [ 0.087902] ambarella-sd e0002000.sdmmc0: Slot0 use bounce buffer[0x88740000<->0x08940000] [ 0.087959] ambarella-sd e0002000.sdmmc0: Slot0 req_size=0x00020000, segs=32, seg_size=0x00020000 [ 0.087991] ambarella-sd e0002000.sdmmc0: Slot0 use ADMA [ 0.160818] ambarella-sd e0002000.sdmmc0: 1 slots @ 50000000Hz [ 0.161002] NET: Registered protocol family 2 [ 0.164926] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.165033] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.165087] TCP: Hash tables configured (established 2048 bind 2048) [ 0.165164] TCP: reno registered [ 0.165189] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.165221] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.165403] NET: Registered protocol family 1 [ 0.165758] RPC: Registered named UNIX socket transport module. [ 0.165794] RPC: Registered udp transport module. [ 0.165810] RPC: Registered tcp transport module. [ 0.165870] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.166332] ambarella-adc e801d000.adc: Ambarella ADC driver init [ 0.167084] audit: initializing netlink socket (disabled) [ 0.167157] type=2000 audit(0.159:1): initialized [ 0.168496] jffs2: version 2.2. (NAND) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc. [ 0.168669] msgmni has been set to 269 [ 0.170277] NET: Registered protocol family 38 [ 0.170402] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.170435] io scheduler noop registered [ 0.170452] io scheduler deadline registered [ 0.170478] io scheduler cfq registered (default) [ 0.171652] e8005000.uart: ttyS0 at MMIO 0xe8005000 (irq = 9) is a ambuart [ 0.172060] ambarella-uart e0032000.uart: Serial[1] use txdma [ 0.172097] ambarella-uart e0032000.uart: Serial[1] use rxdma [ 0.172129] e0032000.uart: ttyS1 at MMIO 0xe0032000 (irq = 25) is a ambuart [ 0.172993] brd: module loaded [ 0.175703] loop: module loaded [ 0.178313] ambarella-nand e0001000.nand: in ecc-[1]bit mode [ 0.178350] ambarella_nand: Use On Flash BBT [ 0.178473] NAND device: Manufacturer ID: 0xc8, Chip ID: 0xda (GigdDevice NAND 256MiB 3,3V 8-bit), 256MiB, page size: 2048, OOB size: 64 [ 0.178736] Bad block table found at page 131008, version 0x43 [ 0.178920] Bad block table found at page 130944, version 0x43 [ 0.179101] nand_read_bbt: bad block at 0x000000020000 [ 0.179121] nand_read_bbt: bad block at 0x000000040000 [ 0.179140] nand_read_bbt: bad block at 0x000000ea0000 [ 0.179156] nand_read_bbt: bad block at 0x000000ec0000 [ 0.179171] nand_read_bbt: bad block at 0x000000ee0000 [ 0.179186] nand_read_bbt: bad block at 0x000000f00000 [ 0.179201] nand_read_bbt: bad block at 0x000000f20000 [ 0.179216] nand_read_bbt: bad block at 0x000000f40000 [ 0.179231] nand_read_bbt: bad block at 0x000000f60000 [ 0.179247] nand_read_bbt: bad block at 0x000000f80000 [ 0.179262] nand_read_bbt: bad block at 0x000000fa0000 [ 0.179277] nand_read_bbt: bad block at 0x000000fc0000 [ 0.179292] nand_read_bbt: bad block at 0x000000fe0000 [ 0.179307] nand_read_bbt: bad block at 0x000001000000 [ 0.179323] nand_read_bbt: bad block at 0x000001020000 [ 0.179338] nand_read_bbt: bad block at 0x000001040000 [ 0.179353] nand_read_bbt: bad block at 0x000001060000 [ 0.179368] nand_read_bbt: bad block at 0x000001080000 [ 0.179383] nand_read_bbt: bad block at 0x0000010a0000 [ 0.179398] nand_read_bbt: bad block at 0x0000010c0000 [ 0.179413] nand_read_bbt: bad block at 0x0000010e0000 [ 0.179428] nand_read_bbt: bad block at 0x000001100000 [ 0.179443] nand_read_bbt: bad block at 0x000001120000 [ 0.179458] nand_read_bbt: bad block at 0x000001140000 [ 0.179473] nand_read_bbt: bad block at 0x000001160000 [ 0.179488] nand_read_bbt: bad block at 0x000001180000 [ 0.179503] nand_read_bbt: bad block at 0x0000011a0000 [ 0.179518] nand_read_bbt: bad block at 0x0000011c0000 [ 0.179533] nand_read_bbt: bad block at 0x0000011e0000 [ 0.179548] nand_read_bbt: bad block at 0x000001200000 [ 0.179563] nand_read_bbt: bad block at 0x000001220000 [ 0.179578] nand_read_bbt: bad block at 0x000001240000 [ 0.179593] nand_read_bbt: bad block at 0x000001260000 [ 0.179608] nand_read_bbt: bad block at 0x000001280000 [ 0.179623] nand_read_bbt: bad block at 0x0000012a0000 [ 0.179638] nand_read_bbt: bad block at 0x0000012c0000 [ 0.179653] nand_read_bbt: bad block at 0x0000012e0000 [ 0.179668] nand_read_bbt: bad block at 0x000001300000 [ 0.179683] nand_read_bbt: bad block at 0x000001320000 [ 0.179698] nand_read_bbt: bad block at 0x000001340000 [ 0.179713] nand_read_bbt: bad block at 0x000001360000 [ 0.179729] nand_read_bbt: bad block at 0x000001380000 [ 0.179744] nand_read_bbt: bad block at 0x0000013a0000 [ 0.179759] nand_read_bbt: bad block at 0x0000013c0000 [ 0.179774] nand_read_bbt: bad block at 0x0000013e0000 [ 0.179789] nand_read_bbt: bad block at 0x000001400000 [ 0.179804] nand_read_bbt: bad block at 0x000001420000 [ 0.179819] nand_read_bbt: bad block at 0x000001440000 [ 0.179834] nand_read_bbt: bad block at 0x000001460000 [ 0.179849] nand_read_bbt: bad block at 0x000001480000 [ 0.179864] nand_read_bbt: bad block at 0x0000014a0000 [ 0.179879] nand_read_bbt: bad block at 0x0000014c0000 [ 0.179894] nand_read_bbt: bad block at 0x0000014e0000 [ 0.179909] nand_read_bbt: bad block at 0x000001500000 [ 0.179924] nand_read_bbt: bad block at 0x000001520000 [ 0.179939] nand_read_bbt: bad block at 0x000001540000 [ 0.179954] nand_read_bbt: bad block at 0x000001560000 [ 0.179969] nand_read_bbt: bad block at 0x000001580000 [ 0.179984] nand_read_bbt: bad block at 0x0000015a0000 [ 0.180000] nand_read_bbt: bad block at 0x0000015c0000 [ 0.180015] nand_read_bbt: bad block at 0x0000015e0000 [ 0.180030] nand_read_bbt: bad block at 0x000001600000 [ 0.180045] nand_read_bbt: bad block at 0x000001620000 [ 0.180060] nand_read_bbt: bad block at 0x000001640000 [ 0.180075] nand_read_bbt: bad block at 0x000001660000 [ 0.180090] nand_read_bbt: bad block at 0x000001680000 [ 0.180210] 10 ofpart partitions found on MTD device amba_nand [ 0.180232] Creating 10 MTD partitions on "amba_nand": [ 0.180256] 0x000000000000-0x000000020000 : "bst" [ 0.182145] 0x000000020000-0x000000160000 : "bld" [ 0.182849] 0x000000160000-0x0000002a0000 : "ptb" [ 0.183521] 0x0000002a0000-0x0000006a0000 : "spl" [ 0.184206] 0x0000006a0000-0x000000ea0000 : "pba" [ 0.184909] 0x000000ea0000-0x0000016a0000 : "pri" [ 0.185634] 0x0000016a0000-0x0000020a0000 : "sec" [ 0.186345] 0x0000020a0000-0x000008ea0000 : "bak" [ 0.187149] 0x000008ea0000-0x00000fca0000 : "lnx" [ 0.187981] 0x00000fca0000-0x00000fea0000 : "add" [ 0.188946] ambarella-pinctrl e8009000.pinctrl: pin io34 already requested by e0032000.uart; cannot claim for e0020000.spi [ 0.189005] ambarella-pinctrl e8009000.pinctrl: pin-34 (e0020000.spi) status -22 [ 0.189037] ambarella-pinctrl e8009000.pinctrl: could not request pin 34 on device e8009000.pinctrl [ 0.189069] ambarella-spi e0020000.spi: Error applying setting, reverse things back [ 0.189147] ambarella-spi e0020000.spi: DMA is used [ 0.189450] ambarella-spi e0020000.spi: Ambarella spi controller 0 created. [ 0.189707] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.189738] ehci-ambarella: AMBARELLA-EHCI Host Controller driver [ 0.190929] ambarella-ehci e0018000.ehci: EHCI Host Controller [ 0.190995] ambarella-ehci e0018000.ehci: new USB bus registered, assigned bus number 1 [ 0.191216] ambarella-ehci e0018000.ehci: irq 39, io mem 0xe0018000 [ 0.210753] ambarella-ehci e0018000.ehci: USB 2.0 started, EHCI 1.00 [ 0.210864] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.210896] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.210925] usb usb1: Product: EHCI Host Controller [ 0.210945] usb usb1: Manufacturer: Linux 3.10.73 ehci_hcd [ 0.210966] usb usb1: SerialNumber: AmbUSB [ 0.211484] hub 1-0:1.0: USB hub found [ 0.211533] hub 1-0:1.0: 2 ports detected [ 0.211809] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.211993] ambarella-ohci e0019000.ohci: Ambarella OHCI [ 0.212048] ambarella-ohci e0019000.ohci: new USB bus registered, assigned bus number 2 [ 0.212112] ambarella-ohci e0019000.ohci: irq 44, io mem 0xe0019000 [ 0.274813] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.274851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.274880] usb usb2: Product: Ambarella OHCI [ 0.274900] usb usb2: Manufacturer: Linux 3.10.73 ohci_hcd [ 0.274921] usb usb2: SerialNumber: AmbUSB [ 0.275457] hub 2-0:1.0: USB hub found [ 0.275508] hub 2-0:1.0: 2 ports detected [ 0.276177] ambarella-rtc e8015000.rtc: rtc core: registered rtc-ambarella as rtc0 [ 0.276347] i2c /dev entries driver [ 0.277014] ambarella-wdt e800c000.wdt: Ambarella Watchdog Timer Probed. [ 0.277403] TCP: cubic registered [ 0.277430] Initializing XFRM netlink socket [ 0.277496] NET: Registered protocol family 10 [ 0.278077] NET: Registered protocol family 17 [ 0.278173] Key type dns_resolver registered [ 0.278255] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.278295] ThumbEE CPU extension supported. [ 0.279696] UBI: attaching mtd7 to ubi0 [ 0.530758] hub 1-0:1.0: over-current condition on port 2 [ 0.563148] UBI: scanning is finished [ 0.569374] UBI: attached mtd7 (name "bak", size 110 MiB) to ubi0 [ 0.569419] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 0.569443] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 0.569464] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 0.569486] UBI: good PEBs: 880, bad PEBs: 0, corrupted PEBs: 0 [ 0.569506] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 0.569530] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1089513100 [ 0.569559] UBI: available PEBs: 0, total reserved PEBs: 880, PEBs reserved for bad PEB handling: 40 [ 0.569636] ambarella-rtc e8015000.rtc: setting system clock to 1970-01-25 06:43:57 UTC (2097837) [ 0.570274] UBI: background thread "ubi_bgt0d" started, PID 45 [ 0.570825] UBIFS: background thread "ubifs_bgt0_0" started, PID 46 [ 0.612956] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 0.613004] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 0.613039] UBIFS: FS size: 104755200 bytes (99 MiB, 825 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 0.613069] UBIFS: reserved for root: 0 bytes (0 KiB) [ 0.613095] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 4F57C051-E695-45BC-9636-B4D88C4988E7, small LPT model [ 0.613794] VFS: Mounted root (ubifs filesystem) on device 0:12. [ 0.615125] devtmpfs: mounted [ 0.615343] Freeing unused kernel memory: 152K (80557000 - 8057d000) [ 1.150811] hub 2-0:1.0: over-current condition [ 1.531987] dsp: module license 'Proprietary' taints kernel. [ 1.532034] Disabling lock debugging due to kernel taint [ 1.533020] dsp_drv_probe_status(713): DSP probe op mode [3], enc mode [7]. [ 1.558235] systemd-journald[64]: [/etc/systemd/journald.conf:11] Failed to parse storage setting, ignoring: memory [ 1.584347] Vout notice: vout0:0 probed! [ 1.584742] Vout notice: vout1:1 probed! [ 1.615281] img: IMG KERN VIRT: WR [0x891f9000, 184 KB], RD [0x87f40000, 36 KB]. [ 1.782040] wm8974_amb.c :: __init wm8974_modinit(void) [ 1.784616] wm8974 audio codec is provided by amba Wu Dongge [ 1.799189] snd_soc_card_amba sound.3: wm8974-hifi <-> e001a000.i2s mapping ok [ 1.878460] iav_drv_probe_status(301): IAV probe status [255], dsp enc mode [3]. [ 1.895315] hw_pts_init(122): HW timer for pts is enabled. [ 1.895346] hw_pts_init(129): Audio clock freq: 12288000, HW timer clock freq: 90000! [ 1.906196] VIN: vin0: probed! [ 1.906252] VIN: vin1: probed! [ 1.931663] dsplog dev init done, dev_id = 248:249. [ 1.932784] dsplog_printk: DSP log by Timer New [ 1.949474] amba_debug_init 248:248. [ 1.951924] Vout notice: CVBS:0@1 probed! [ 1.962250] Vout notice: DBus-All:1@0 probed! [ 2.129261] dhd_module_init: in [ 2.129326] ======== bcm_wlan_set_plat_data ======== [ 2.129346] dhd_wifi_platform_load: Enter [ 2.129381] Power-up adapter 'DHD generic adapter' [ 2.129458] wifi_platform_set_power = 1 [ 2.129480] ======== PULL WL_REG_ON[93], active[1], HIGH! ======== [ 2.232579] systemd-udevd[85]: starting version 215 [ 2.691828] wifi_platform_bus_enumerate device present 1 [ 2.691876] ======== Card detection to detect SDIO card! Slot.num[0] ======== [ 2.720113] ambarella-udc e0006000.udc: ambarella_udc: version 12 August 2015 [ 2.730789] systemd-journald[64]: Received request to flush runtime journal from PID 1 [ 2.777047] input: AmbIR as /devices/virtual/input/input0 [ 2.777108] ambarella-ir e8006000.ir: Invalid keymap! [ 2.777290] ambarella-ir: probe of e8006000.ir failed with error -2 [ 2.806174] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.807813] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.809459] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.813282] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.875501] mmc0: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.875588] mmc0: new high speed SDIO card at address 0001 [ 2.881715] ambarella-crypto f0020000.crypto: Ambarella Media Processor Cryptography Engine probed(interrupt mode). [ 2.893227] bcmsdh_register: register client driver [ 2.893404] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 2.893540] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 2.893567] bus num (host idx)=0, slot num (rca)=1 [ 2.893585] found adapter info 'DHD generic adapter' [ 2.893920] dhdsdio_probe : no mutex held. set lock [ 2.894057] F1 signature read @0x18000000=0x1602a94c [ 2.904420] F1 signature OK, socitype:0x1 chip:0xa94c rev:0x2 pkg:0x0 [ 2.905983] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 2.908544] dhd_conf_set_chiprev: chip=0xa94c, chiprev=2 [ 2.934732] dhd_conf_read_roam_params: roam_off = 1 [ 2.934782] dhd_conf_read_roam_params: roam_off_suspend = 1 [ 2.956395] wl_create_event_handler(): thread:wl_event_handler:73 started [ 2.956739] tsk Enter, tsk = 0x8760135c [ 2.960014] dhd_attach(): thread:dhd_watchdog_thread:74 started [ 2.965823] dhd_attach(): thread:dhd_dpc:75 started [ 2.966116] dhd_dpc_thread: set dpc_cpucore 0 from config.txt [ 2.966984] dhd_attach(): thread:dhd_rxf:76 started [ 2.967030] dhd_deferred_work_init: work queue initialized [ 3.011617] Dongle Host Driver, version 1.201.59.6 (r506368) Compiled in drivers/net/wireless/bcmdhd on Jun 30 2017 at 01:13:53 [ 3.012307] Register interface [wlan0] MAC: ac:83:f3:a6:18:90 [ 3.012353] dhdsdio_probe : the lock is released. [ 3.012483] dhd_module_init: Exit err=0 [ 3.992952] UBI: attaching mtd6 to ubi1 [ 4.026331] UBI: scanning is finished [ 4.040855] UBI: attached mtd6 (name "sec", size 10 MiB) to ubi1 [ 4.040901] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 4.040946] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 4.040968] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 4.040988] UBI: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 [ 4.041007] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 4.041029] UBI: max/mean erase counter: 14/9, WL threshold: 4096, image sequence number: 2064066047 [ 4.041056] UBI: available PEBs: 11, total reserved PEBs: 69, PEBs reserved for bad PEB handling: 40 [ 4.042392] UBI: background thread "ubi_bgt1d" started, PID 161 [ 4.123648] UBIFS: background thread "ubifs_bgt1_0" started, PID 164 [ 4.293480] UBIFS: mounted UBI device 1, volume 0, name "usr-c" [ 4.297619] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 4.297818] UBIFS: FS size: 2031616 bytes (1 MiB, 16 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) [ 4.297856] UBIFS: reserved for root: 95957 bytes (93 KiB) [ 4.297884] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D100E21E-2DE7-442A-9E78-59ABA27A2D51, small LPT model [ 4.890791] SYSCLK:SO[24000000] [ 4.911045] VIN: OV9750 init(2-lane mipi) [ 5.079208] SSID available [ 5.119218] Starting mcu_daemon.sh [ 5.143809] mcu_daemon.sh: locking [ 7.830308] mcu_update: 'f6412eb3' | 'f6412eb3' [ 7.831943] mcu_daemon ready [ 7.840379] mcu_daemon.sh: unlocked [ 8.598551] mars_led.sh locked [ 8.619152] mars_led.sh unlocked [ 8.656123] mars_led.sh locked [ 8.670819] mars_led.sh unlocked [ 8.702605] dhd_open: Enter 87767000 [ 8.702981] dhd_conf_read_roam_params: roam_off = 1 [ 8.703000] dhd_conf_read_roam_params: roam_off_suspend = 1 [ 8.703197] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/broadcom/ap6234/fw_bcm43341b0_ag.bin [ 8.703208] dhdsdio_download_firmware: set use_rxchain 1 from config.txt [ 8.703214] Final fw_path=/lib/firmware/broadcom/ap6234/fw_bcm43341b0_ag.bin [ 8.703221] Final nv_path=/lib/firmware/broadcom/ap6234/nvram_ap6234_tcpka.txt [ 8.703227] Final conf_path=/lib/firmware/broadcom/ap6234/bcmdhd.cal [ 8.885177] NVRAM version: AP6234_NVRAM_V1.1_20131225 [ 8.885892] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 9.050391] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 9.052310] dhd_conf_set_band: Set band 0 [ 9.052535] dhd_preinit_ioctls: Set tcpack_sup_mode 0 [ 9.054708] Firmware up: op_mode=0x0015, MAC=ac:83:f3:a6:18:90 [ 9.054727] dhd_conf_set_country: Set country US, revision 0 [ 9.129449] Country code: US (US/0) [ 9.129805] dhd_conf_set_roam: Set roam_off 1 [ 9.140211] Firmware version = wl0: Jul 27 2015 18:57:58 version 6.10.191.wowl.5 (B0 Station/P2P) FWID 01-79c8a2fd es4.c3 [ 9.140236] Driver: 1.201.59.6 (r506368) Firmware: wl0: Jul 27 2015 18:57:58 version 6.10.191.wowl.5 (B0 Station/P2P) FWID 01-79c8a2fd es4.c3 [ 9.140252] dhd_txglom_enable: enable 0 [ 9.140259] dhd_conf_set_disable_proptx: set disable_proptx 0 [ 9.147069] dhd_preinit_ioctls wl ampdu_hostreorder failed -23 [ 9.180901] dhd_open: Exit ret=0 [ 11.439303] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 12.396468] Bluetooth: Core ver 2.16 [ 12.397697] NET: Registered protocol family 31 [ 12.397716] Bluetooth: HCI device and connection manager initialized [ 12.397762] Bluetooth: HCI socket layer initialized [ 12.397778] Bluetooth: L2CAP socket layer initialized [ 12.397817] Bluetooth: SCO socket layer initialized [ 12.410892] Bluetooth: HCI UART driver ver 2.2 [ 12.410915] Bluetooth: HCI H4 protocol initialized [ 12.410922] Bluetooth: HCI BCSP protocol initialized [ 12.410928] Bluetooth: HCILL protocol initialized [ 12.410934] Bluetooth: HCI Three-wire UART (H5) protocol initialized [ 18.308765] Connectting with 6c:70:9f:dc:62:5a channel (1) ssid "TUFFNET2", len (8) [ 18.322129] wl_bss_connect_done succeeded with 6c:70:9f:dc:62:5a [ 18.325585] cfg80211: Calling CRDA for country: US [ 18.325715] CFG80211-ERROR) wl_cfg80211_reg_notifier : Set country code US from 11d AP [ 18.326985] cfg80211: Regulatory domain changed to country: US [ 18.327004] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 18.327016] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (3000 mBi, 0 mBm) [ 18.327026] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2300 mBi, 0 mBm) [ 18.327034] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2300 mBi, 0 mBm) [ 18.327042] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2300 mBi, 0 mBm) [ 18.327050] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (3000 mBi, 0 mBm) [ 18.327059] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (4000 mBi, 0 mBm) [ 18.336743] wl_bss_connect_done succeeded with 6c:70:9f:dc:62:5a [ 21.136101] wlan0 Link encap:Ethernet HWaddr AC:83:F3:A6:18:90 inet addr:10.0.1.28 Bcast:10.0.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1367 (1.3 KiB) TX bytes:1418 (1.3 KiB) [ 21.165354] mars_led.sh locked [ 21.175825] mars_led.sh unlocked [ 22.747541] nl_process_session_cmd(165): NETLINK DBG: Correct connect cmd from app 429. [ 22.747570] nl_send_msg(125): NETLINK DBG: Send session status 0 to session cmd 0 of app 429. [ 23.580225] iav_goto_idle(935): Goto Idle from STATE_INIT. [ 23.580248] dsp_set_op_mode(449): [debug]: dsp_set_op_mode: dsp->op_mode(3), op_mode(0) [ 23.580262] __reset_vin(219): dsp reset vin [ 23.593148] dsp_set_op_mode(472): Entering DSP mode [0]... [ 23.628236] dsp_set_op_mode(480): [Done] Entered mode [0]. [ 26.708306] iav_check_vout(653): VOUT are all disabled. [ 26.708371] check_dsp_mem_bandwidth(972): S2L chip ID [1], DSP memory bandwidth [113 MB/s], limit [1148 MB/s]. [ 26.708387] check_dsp_mem_size(1175): DSP DRAM size used [34 MB], limit [81 MB]. [ 26.708420] nl_send_msg(104): NETLINK DBG: Send request cmd 2 to app 429. [ 26.779415] nl_process_request_status(219): NETLINK DBG: Request 2 succeeded from app 429. [ 26.779531] dsp_set_enc_sub_mode(427): Entering DSP ENC sub mode [2] [ 26.931658] handle_enc_msg(210): DSP DRAM Used: 34 MB, Limited: 81 MB [ 26.931699] dsp_set_enc_sub_mode(434): [Done] Entered sub mode. [ 26.933504] calc_frame_rate(333): idsp out fps 17066667 (scan format: 0, den_encode_fps: 1000), encode fps 30000 [ 26.998365] nl_send_msg(104): NETLINK DBG: Send request cmd 0 to app 429. [ 27.065477] nl_process_request_status(219): NETLINK DBG: Request 0 succeeded from app 429. [ 27.065840] iav_enable_preview(830): preview enabled. [ 27.198375] iav_ioc_start_encode(1519): Wait 4 frames before encode for encode start delay. [ 27.198402] check_encode_resource_limit(807): Check encode resource limit : VIN [30], system load 36000. [ 27.198423] check_dsp_mem_bandwidth(972): S2L chip ID [1], DSP memory bandwidth [168 MB/s], limit [1148 MB/s]. [ 27.198437] check_dsp_mem_size(1175): DSP DRAM size used [34 MB], limit [81 MB]. [ 27.198472] iav_ioc_start_encode(1530): Init encoder when start encoding from preview state. [ 27.198540] calc_frame_rate(333): idsp out fps 17066667 (scan format: 0, den_encode_fps: 1000), encode fps 30000 [ 27.198561] calc_frame_rate(333): idsp out fps 17066667 (scan format: 0, den_encode_fps: 1000), encode fps 30000 [ 27.308523] check_encode_resource_limit(807): Check encode resource limit : VIN [30], system load 36000. [ 27.308634] check_encode_resource_limit(807): Check encode resource limit : VIN [30], system load 36000. [ 27.833035] calc_frame_rate(333): idsp out fps 34133333 (scan format: 0, den_encode_fps: 1000), encode fps 15000 [ 29.292815] nl_process_session_cmd(165): NETLINK DBG: Correct connect cmd from app 575. [ 29.292844] nl_send_msg(125): NETLINK DBG: Send session status 0 to session cmd 0 of app 575. [ 1939.972757] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3 [ 1939.976977] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK [ 1939.977006] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 6c:70:9f:dc:62:5a [ 1939.978233] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DEAUTH [ 1939.993959] cfg80211: Calling CRDA to update world regulatory domain [ 1939.995177] CFG80211-ERROR) wl_cfg80211_reg_notifier : reg_notifier for intiator:0 not supported : set default [ 1939.995201] CFG80211-ERROR) wl_cfg80211_reg_notifier : Set country code 00 from User [ 1939.997599] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for 00 as 00 rev -1 failed [ 1939.997640] CFG80211-ERROR) wl_cfg80211_reg_notifier : set country Failed :-2 [ 1939.997651] cfg80211: World regulatory domain updated: [ 1939.997660] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1939.997671] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm) [ 1939.997679] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 1939.997687] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 1939.997695] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 1939.997703] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 1939.997711] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm) [ 1939.997719] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 1939.997728] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 1939.998608] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1943.317017] Connectting with 6c:70:9f:dc:62:5a channel (1) ssid "TUFFNET2", len (8) [ 1943.331575] wl_bss_connect_done succeeded with 6c:70:9f:dc:62:5a [ 1943.336138] cfg80211: Calling CRDA for country: US [ 1943.336269] CFG80211-ERROR) wl_cfg80211_reg_notifier : Set country code US from 11d AP [ 1943.337730] cfg80211: Regulatory domain changed to country: US [ 1943.337749] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1943.337761] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (3000 mBi, 0 mBm) [ 1943.337770] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2300 mBi, 0 mBm) [ 1943.337778] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2300 mBi, 0 mBm) [ 1943.337787] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2300 mBi, 0 mBm) [ 1943.337795] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (3000 mBi, 0 mBm) [ 1943.337803] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (4000 mBi, 0 mBm) [ 1943.373588] wl_bss_connect_done succeeded with 6c:70:9f:dc:62:5a [ 1945.337058] mars_led.sh locked [ 1945.365476] mars_led.sh unlocked [ 1945.445370] mars_led.sh locked [ 1945.489159] mars_led.sh unlocked [ 1949.614819] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3 [ 1949.620243] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK [ 1949.620273] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 6c:70:9f:dc:62:5a [ 1949.621463] cfg80211: Calling CRDA to update world regulatory domain [ 1949.621554] CFG80211-ERROR) wl_cfg80211_reg_notifier : reg_notifier for intiator:0 not supported : set default [ 1949.621568] CFG80211-ERROR) wl_cfg80211_reg_notifier : Set country code 00 from User [ 1949.625307] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for 00 as 00 rev -1 failed [ 1949.625333] CFG80211-ERROR) wl_cfg80211_reg_notifier : set country Failed :-2 [ 1949.625343] cfg80211: World regulatory domain updated: [ 1949.625352] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1949.625363] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm) [ 1949.625373] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 1949.625381] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 1949.625389] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 1949.625397] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 1949.625405] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm) [ 1949.625413] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 1949.625422] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 1949.625951] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1952.988420] Connectting with 6c:70:9f:dc:62:5a channel (1) ssid "TUFFNET2", len (8) [ 1953.006342] wl_bss_connect_done succeeded with 6c:70:9f:dc:62:5a [ 1953.011978] cfg80211: Calling CRDA for country: US [ 1953.012171] CFG80211-ERROR) wl_cfg80211_reg_notifier : Set country code US from 11d AP [ 1953.013713] cfg80211: Regulatory domain changed to country: US [ 1953.013732] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1953.013744] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (3000 mBi, 0 mBm) [ 1953.013754] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2300 mBi, 0 mBm) [ 1953.013763] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2300 mBi, 0 mBm) [ 1953.013771] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2300 mBi, 0 mBm) [ 1953.013779] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (3000 mBi, 0 mBm) [ 1953.013788] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (4000 mBi, 0 mBm) [ 1953.101732] wl_bss_connect_done succeeded with 6c:70:9f:dc:62:5a [ 1956.125231] wlan0 Link encap:Ethernet HWaddr AC:83:F3:A6:18:90 inet addr:10.0.1.61 Bcast:10.0.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2880 errors:0 dropped:0 overruns:0 frame:0 TX packets:1674 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:666113 (650.5 KiB) TX bytes:819562 (800.3 KiB) [ 1956.170220] mars_led.sh locked [ 1956.188366] mars_led.sh unlocked [15662.246326] calc_frame_rate(333): idsp out fps 17066667 (scan format: 0, den_encode_fps: 1000), encode fps 30000 [15662.846226] calc_frame_rate(333): idsp out fps 34133333 (scan format: 0, den_encode_fps: 1000), encode fps 15000 [15683.681643] calc_frame_rate(333): idsp out fps 17066667 (scan format: 0, den_encode_fps: 1000), encode fps 30000