System: Kernel: 6.19.6-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.2.1 clocksource: tsc avail: acpi_pm parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=es tz=Europe/Madrid misobasedir=garuda root=miso:LABEL=GARUDA_HYPRLAND_BROADWING quiet systemd.show_status=1 checksum=y driver=free nouveau.modeset=1 i915.modeset=1 radeon.modeset=1 Console: tty 3 DM: SDDM Distro: Garuda base: Arch Linux Machine: Type: Desktop System: ASUS product: N/A v: N/A serial: Mobo: ASUSTeK model: PRIME H610M-R D4 v: Rev 1.xx serial: part-nu: SKU uuid: Firmware: UEFI vendor: American Megatrends v: 4004 date: 05/09/2026 CPU: Info: model: 13th Gen Intel Core i5-13400F bits: 64 type: MST AMCP arch: Raptor Lake gen: core 13 level: v3 note: check built: 2022+ process: Intel 7 (10nm) family: 6 model-id: 0xBF (191) stepping: 2 microcode: 0x3E Topology: cpus: 1x dies: 1 clusters: 7 cores: 10 threads: 16 mt: 6 tpc: 2 st: 4 smt: enabled cache: L1: 864 KiB desc: d-4x32 KiB, 6x48 KiB; i-6x32 KiB, 4x64 KiB L2: 9.5 MiB desc: 6x1.2 MiB, 1x2 MiB L3: 20 MiB desc: 1x20 MiB Speed (MHz): avg: 800 min/max: 800/4600:3300 scaling: driver: intel_pstate governor: powersave cores: 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 13: 800 14: 800 15: 800 16: 800 bogomips: 79872 Flags-basic: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Vulnerabilities: Graphics: Device-1: NVIDIA GB206 [GeForce RTX 5060] vendor: ASUSTeK driver: nouveau v: kernel alternate: nvidia_drm,nvidia non-free: 550-6xx.xx+ status: current (as of 2026-07) arch: Lovelace code: AD1xx process: TSMC n4 (5nm) built: 2022+ pcie: gen: 4 speed: 16 GT/s lanes: 8 link-max: gen: 5 speed: 32 GT/s lanes: 16 ports: active: DP-1,HDMI-A-1 empty: DP-2,DP-3 bus-ID: 01:00.0 chip-ID: 10de:2d05 class-ID: 0300 Device-2: Microdia Dual Mode Camera (8006 VGA) driver: hid-generic,usbhid type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-3:4 chip-ID: 0c45:8006 class-ID: 0301 Display: unspecified server: X.org v: 1.21.1.24 with: Xwayland v: 24.1.13 driver: X: loaded: modesetting alternate: fbdev,nouveau,nv,vesa gpu: nouveau tty: 240x67 Monitor-1: DP-1 model: PD1560 built: 2017 res: 1920x1080 dpi: 139 gamma: 1.2 size: 531x299mm (20.91x11.77") diag: 398mm (15.7") ratio: 16:9 modes: max: 1920x1080 min: 720x400 Monitor-2: HDMI-A-1 model: MSI MP223 serial: built: 2024 res: 1920x1080 dpi: 102 gamma: 1.2 size: 479x260mm (18.86x10.24") diag: 545mm (21.5") ratio: 16:9 modes: max: 1920x1080 min: 720x400 API: OpenGL Message: GL data unavailable in console, glxinfo missing. Info: Tools: gpu: nvidia-smi wl: kanshi, wdisplays, wlr-randr x11: xprop Audio: Device-1: Intel 600 Series Family HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel alternate: snd_soc_avs,snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:7ad0 class-ID: 0403 Device-2: NVIDIA GB206 High Definition Audio driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 8 link-max: gen: 5 speed: 32 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:22eb class-ID: 0403 API: ALSA v: k6.19.6-zen1-1-zen status: kernel-api tools: alsactl,alsamixer,amixer Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl Server-2: PipeWire v: 1.6.8 status: off with: 1: pipewire-pulse status: off 2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl Network: Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK RTL8111H driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200 IF: enp3s0 state: down mac: Device-2: TP-Link Archer T2U PLUS [RTL8821AU] driver: rtw88_8821au type: USB rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-1:2 chip-ID: 2357:0120 class-ID: 0000 serial: IF: wlp0s20f0u1 state: down mac: IF-ID-1: enp0s20f0u6 state: unknown speed: -1 duplex: unknown mac: Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant Bluetooth: Device-1: OPPO CPH2689 driver: rndis_host v: kernel type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-6:7 chip-ID: 22d9:2766 class-ID: 0a00 serial: RAID: Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd v: 0.6 port: N/A bus-ID: 00:0e.0 chip-ID: 8086:467f rev: class-ID: 0104 Drives: Local Storage: total: 961.34 GiB used: 0 KiB (0.0%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SNV3S1000G size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: fw-rev: P3BR0A27 temp: 44.9 C scheme: GPT ID-2: /dev/sda maj-min: 8:0 vendor: Philips model: USB Flash Drive size: 29.82 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 2.0 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: SSD serial: fw-rev: 8.07 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Partition: Message: No partition data found. Swap: Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: zram size: 31.15 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 dev: /dev/zram0 Sensors: System Temperatures: cpu: 31.0 C mobo: N/A Fan Speeds (rpm): N/A Info: Memory: total: 32 GiB available: 31.15 GiB used: 13.02 GiB (41.8%) Processes: 267 Power: uptime: 13m states: freeze,mem,disk suspend: deep avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend, test_resume image: 12.42 GiB Init: systemd v: 261 default: graphical tool: systemctl Packages: pm: pacman pkgs: 1264 libs: 341 tools: pacseek,paru Compilers: gcc: 16.1.1 Shell: Bash v: 5.3.15 running-in: tty 3 inxi: 3.3.41 Garuda (2.12.6-3): System install date: 2026-07-31 Garuda release: 260309 Last full system update: 2026-07-31 Is partially upgraded: No Relevant software: snapper NetworkManager dracut nvidia-580xx-dkms garuda-hardware-profile-standard Windows dual boot: Failed units: snapper-cleanup.service Garuda Health is running in a live environment. Use --ignore-live to run checks and display results anyway.