[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.5.0-4-arm64 (debian-kernel@lists.debian.org) (gcc-13 (Debian 13.2.0-6) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41) #1 SMP Debian 6.5.10-1 (2023-11-03) [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.1 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x000000003ef63240..0x000000003ef633f3 (0 KiB) nomap non-reusable nvram@0 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7fbeb280-0x7fbedfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges [ 0.000000] percpu: Embedded 31 pages/cpu s88488 r8192 d30296 u126976 [ 0.000000] pcpu-alloc: s88488 r8192 d30296 u126976 alloc=31*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xb03141 bcm2709.serial=0xad4703a7 bcm2709.uart_clock=48000000 smsc95xx.macaddr=D8:3A:DD:A6:4A:BF vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 496944 [ 0.000000] Policy zone: DMA32 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB) [ 0.000000] Memory: 905252K/2019328K available (13888K kernel code, 2788K rwdata, 9808K rodata, 7040K init, 921K bss, 172468K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 45968 entries in 180 pages [ 0.000000] ftrace: allocated 180 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000440] Console: colour dummy device 80x25 [ 0.000455] printk: console [tty0] enabled [ 0.001131] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.001162] pid_max: default: 32768 minimum: 301 [ 0.001468] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity [ 0.001546] landlock: Up and running. [ 0.001558] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.001690] AppArmor: AppArmor initialized [ 0.001711] TOMOYO Linux initialized [ 0.001756] LSM support for eBPF active [ 0.001932] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001978] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.004711] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.004845] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.005157] rcu: Hierarchical SRCU implementation. [ 0.005175] rcu: Max phase no-delay instances is 1000. [ 0.007832] EFI services will not be available. [ 0.008309] smp: Bringing up secondary CPUs ... [ 0.009014] Detected PIPT I-cache on CPU1 [ 0.009131] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.009953] Detected PIPT I-cache on CPU2 [ 0.010038] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.010767] Detected PIPT I-cache on CPU3 [ 0.010851] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.010957] smp: Brought up 1 node, 4 CPUs [ 0.011023] SMP: Total of 4 processors activated. [ 0.011038] CPU features: detected: 32-bit EL0 Support [ 0.011050] CPU features: detected: 32-bit EL1 Support [ 0.011065] CPU features: detected: CRC32 instructions [ 0.011180] CPU: All CPU(s) started at EL2 [ 0.011203] alternatives: applying system-wide alternatives [ 0.039152] node 0 deferred pages initialised in 24ms [ 0.040527] devtmpfs: initialized [ 0.050253] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.050353] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.052221] pinctrl core: initialized pinctrl subsystem [ 0.054272] DMI not present or invalid. [ 0.055050] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.057574] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.057857] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.058341] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.058496] audit: initializing netlink subsys (disabled) [ 0.058717] audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1 [ 0.059992] thermal_sys: Registered thermal governor 'fair_share' [ 0.060002] thermal_sys: Registered thermal governor 'bang_bang' [ 0.060021] thermal_sys: Registered thermal governor 'step_wise' [ 0.060035] thermal_sys: Registered thermal governor 'user_space' [ 0.060048] thermal_sys: Registered thermal governor 'power_allocator' [ 0.060118] cpuidle: using governor ladder [ 0.060164] cpuidle: using governor menu [ 0.060462] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.060610] ASID allocator initialised with 32768 entries [ 0.061277] Serial: AMBA PL011 UART driver [ 0.080974] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.081011] Modules: 0 pages in range for non-PLT usage [ 0.081017] Modules: 515616 pages in range for PLT usage [ 0.082248] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.082280] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.082298] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.082313] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.082328] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.082342] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.082356] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.082370] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.086146] ACPI: Interpreter disabled. [ 0.087075] iommu: Default domain type: Translated [ 0.087096] iommu: DMA domain TLB invalidation policy: strict mode [ 0.087535] pps_core: LinuxPPS API ver. 1 registered [ 0.087553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.087583] PTP clock support registered [ 0.087633] EDAC MC: Ver: 3.0.0 [ 0.088366] scmi_core: SCMI protocol bus registered [ 0.090147] NetLabel: Initializing [ 0.090169] NetLabel: domain hash size = 128 [ 0.090181] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.090268] NetLabel: unlabeled traffic allowed by default [ 0.090581] vgaarb: loaded [ 0.091261] clocksource: Switched to clocksource arch_sys_counter [ 0.172710] VFS: Disk quotas dquot_6.6.0 [ 0.172828] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.173746] AppArmor: AppArmor Filesystem Enabled [ 0.173875] pnp: PnP ACPI: disabled [ 0.184318] NET: Registered PF_INET protocol family [ 0.184640] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.187820] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.188038] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.188151] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.188591] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.189127] TCP: Hash tables configured (established 16384 bind 16384) [ 0.189526] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) [ 0.189672] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.189735] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.189972] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.190051] NET: Registered PF_XDP protocol family [ 0.190081] PCI: CLS 0 bytes, default 64 [ 0.190565] Trying to unpack rootfs image as initramfs... [ 0.190726] kvm [1]: IPA Size Limit: 44 bits [ 0.193617] kvm [1]: vgic interrupt IRQ9 [ 0.193741] kvm [1]: Hyp mode initialized successfully [ 0.196506] Initialise system trusted keyrings [ 0.196599] Key type blacklist registered [ 0.196923] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 0.197069] zbud: loaded [ 0.197929] integrity: Platform Keyring initialized [ 0.197972] integrity: Machine keyring initialized [ 0.197990] Key type asymmetric registered [ 0.198005] Asymmetric key parser 'x509' registered [ 1.971366] Freeing initrd memory: 30848K [ 2.000327] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.000542] io scheduler mq-deadline registered [ 2.005723] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 14) [ 2.015373] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.016527] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 2.016561] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 2.016610] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [ 2.016654] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000 [ 2.017582] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 2.017610] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.017632] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 2.017690] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 2.017784] pci 0000:00:00.0: PME# supported from D0 D3hot [ 2.020471] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.241316] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 2.241384] pci 0000:01:00.0: [1b21:1064] type 00 class 0x010601 [ 2.241426] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff] [ 2.241491] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff] [ 2.241519] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 2.241548] pci 0000:01:00.0: enabling Extended Tags [ 2.241654] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.241764] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 7.876 Gb/s with 8.0 GT/s PCIe x1 link) [ 2.251315] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.251364] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff] [ 2.251392] pci 0000:01:00.0: BAR 6: assigned [mem 0x600000000-0x60007ffff pref] [ 2.251417] pci 0000:01:00.0: BAR 0: assigned [mem 0x600080000-0x600081fff] [ 2.251442] pci 0000:01:00.0: BAR 5: assigned [mem 0x600082000-0x600083fff] [ 2.251467] pci 0000:00:00.0: PCI bridge to [bus 01] [ 2.251485] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 2.251688] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 2.251861] pcieport 0000:00:00.0: PME: Signaling with IRQ 19 [ 2.252231] pcieport 0000:00:00.0: AER: enabled with IRQ 19 [ 2.254028] simple-framebuffer 3e4e0000.framebuffer: framebuffer at 0x3e4e0000, 0x6e7000 bytes [ 2.254056] simple-framebuffer 3e4e0000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296 [ 2.261116] Console: switching to colour frame buffer device 228x61 [ 2.267638] simple-framebuffer 3e4e0000.framebuffer: fb0: simplefb registered! [ 2.280898] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.283801] printk: console [ttyS1] disabled [ 2.284301] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 27, base_baud = 62499999) is a 16550 [ 2.284414] printk: console [ttyS1] enabled [ 3.585585] Serial: AMBA driver [ 3.588863] SuperH (H)SCI(F) driver initialized [ 3.594183] msm_serial: driver initialized [ 3.601631] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.610018] mousedev: PS/2 mouse device common for all mice [ 3.617015] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 3.624340] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 3.633339] ledtrig-cpu: registered to indicate activity on CPUs [ 3.640885] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 3.648155] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 3.718229] NET: Registered PF_INET6 protocol family [ 3.749197] Segment Routing with IPv6 [ 3.753059] In-situ OAM (IOAM) with IPv6 [ 3.757200] mip6: Mobile IPv6 [ 3.760265] NET: Registered PF_PACKET protocol family [ 3.765624] mpls_gso: MPLS GSO support [ 3.777620] registered taskstats version 1 [ 3.782140] Loading compiled-in X.509 certificates [ 3.879007] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 3.888017] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 3.909605] Key type .fscrypt registered [ 3.913673] Key type fscrypt-provisioning registered [ 3.943019] Key type encrypted registered [ 3.947179] AppArmor: AppArmor sha1 policy hashing enabled [ 3.952841] ima: No TPM chip found, activating TPM-bypass! [ 3.958460] ima: Allocated hash algorithm: sha256 [ 3.963329] ima: No architecture policies found [ 3.968020] evm: Initialising EVM extended attributes: [ 3.973281] evm: security.selinux [ 3.976676] evm: security.SMACK64 (disabled) [ 3.981047] evm: security.SMACK64EXEC (disabled) [ 3.987664] evm: security.SMACK64TRANSMUTE (disabled) [ 3.994695] evm: security.SMACK64MMAP (disabled) [ 4.001276] evm: security.apparmor [ 4.006628] evm: security.ima [ 4.011545] evm: security.capability [ 4.017055] evm: HMAC attrs: 0x1 [ 4.535898] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2 [ 4.547226] serial serial0: tty port ttyAMA0 registered [ 4.555637] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:50:39 [ 4.579237] clk: Disabling unused clocks [ 4.596955] Freeing unused kernel memory: 7040K [ 4.630926] Checked W+X mappings: passed, no W+X pages found [ 4.638672] Run /init as init process [ 4.644284] with arguments: [ 4.644294] /init [ 4.644302] with environment: [ 4.644309] HOME=/ [ 4.644316] TERM=linux [ 5.438608] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 5.468783] sdhci: Secure Digital Host Controller Interface driver [ 5.477119] sdhci: Copyright(c) Pierre Ossman [ 5.549337] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.587226] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq [ 5.600268] SCSI subsystem initialized [ 5.602306] usbcore: registered new interface driver usbfs [ 5.603303] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 5.622320] usbcore: registered new interface driver hub [ 5.630074] usbcore: registered new device driver usb [ 5.639338] mmc0: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO [ 5.642806] mmc1: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 5.706489] libata version 3.00 loaded. [ 5.725302] ahci 0000:01:00.0: version 3.0 [ 5.725339] ahci 0000:01:00.0: enabling device (0000 -> 0002) [ 5.733955] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator [ 5.734013] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 5.741443] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator [ 5.757932] mmc1: new HS200 MMC card at address 0001 [ 5.759147] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode [ 5.765420] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB [ 5.772817] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst [ 5.780169] mmcblk1: p1 p2 [ 5.802831] mmcblk1boot0: mmc1:0001 BJTD4R 4.00 MiB [ 5.811733] dwc2 fe980000.usb: DWC OTG Controller [ 5.814703] mmcblk1boot1: mmc1:0001 BJTD4R 4.00 MiB [ 5.816685] dwc2 fe980000.usb: new USB bus registered, assigned bus number 1 [ 5.824998] mmcblk1rpmb: mmc1:0001 BJTD4R 4.00 MiB, chardev (239:0) [ 5.828978] dwc2 fe980000.usb: irq 39, io mem 0xfe980000 [ 5.851665] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 5.855535] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 5.860099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.880185] usb usb1: Product: DWC OTG Controller [ 5.887218] usb usb1: Manufacturer: Linux 6.5.0-4-arm64 dwc2_hsotg [ 5.895546] usb usb1: SerialNumber: fe980000.usb [ 5.903394] hub 1-0:1.0: USB hub found [ 5.909485] hub 1-0:1.0: 1 port detected [ 5.936089] scsi host0: ahci [ 5.942199] scsi host1: ahci [ 5.948087] scsi host2: ahci [ 5.953951] scsi host3: ahci [ 5.959590] scsi host4: ahci [ 5.965169] scsi host5: ahci [ 5.970696] scsi host6: ahci [ 5.976247] scsi host7: ahci [ 5.981779] scsi host8: ahci [ 5.987313] scsi host9: ahci [ 5.992727] scsi host10: ahci [ 5.998309] scsi host11: ahci [ 6.003870] scsi host12: ahci [ 6.009679] scsi host13: ahci [ 6.012482] mmc0: Failed to initialize a non-removable card [ 6.014161] scsi host14: ahci [ 6.027675] scsi host15: ahci [ 6.033258] scsi host16: ahci [ 6.038848] scsi host17: ahci [ 6.044413] scsi host18: ahci [ 6.049899] scsi host19: ahci [ 6.055437] scsi host20: ahci [ 6.060833] scsi host21: ahci [ 6.066242] scsi host22: ahci [ 6.071625] scsi host23: ahci [ 6.076550] ata1: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082100 irq 38 [ 6.085813] ata2: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082180 irq 38 [ 6.095040] ata3: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082200 irq 38 [ 6.104243] ata4: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082280 irq 38 [ 6.113408] ata5: DUMMY [ 6.117366] ata6: DUMMY [ 6.121300] ata7: DUMMY [ 6.125172] ata8: DUMMY [ 6.129054] ata9: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082500 irq 38 [ 6.138177] ata10: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082580 irq 38 [ 6.147414] ata11: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082600 irq 38 [ 6.156632] ata12: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082680 irq 38 [ 6.165820] ata13: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082700 irq 38 [ 6.174968] ata14: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082780 irq 38 [ 6.184119] ata15: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082800 irq 38 [ 6.193211] ata16: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082880 irq 38 [ 6.202304] ata17: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082900 irq 38 [ 6.211377] ata18: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082980 irq 38 [ 6.220412] ata19: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082a00 irq 38 [ 6.229400] ata20: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082a80 irq 38 [ 6.238348] ata21: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082b00 irq 38 [ 6.247277] ata22: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082b80 irq 38 [ 6.256177] ata23: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082c00 irq 38 [ 6.265046] ata24: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082c80 irq 38 [ 6.399289] usb 1-1: new high-speed USB device number 2 using dwc2 [ 6.611506] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 6.620938] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.631063] hub 1-1:1.0: USB hub found [ 6.636185] hub 1-1:1.0: 4 ports detected [ 6.927285] usb 1-1.2: new low-speed USB device number 3 using dwc2 [ 7.042857] usb 1-1.2: New USB device found, idVendor=413c, idProduct=2005, bcdDevice= 1.05 [ 7.052423] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.060912] usb 1-1.2: Product: DELL USB Keyboard [ 7.066739] usb 1-1.2: Manufacturer: DELL [ 7.101935] hid: raw HID events driver (C) Jiri Kosina [ 7.183280] ata1: found unknown device (class 0) [ 7.189121] ata1: SATA link down (SStatus 0 SControl 300) [ 8.107290] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8.115262] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 8.123520] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 8.132346] ata2.00: configured for UDMA/133 [ 8.138467] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 8.461681] ata3: SATA link down (SStatus 0 SControl 300) [ 8.781683] ata4: SATA link down (SStatus 0 SControl 300) [ 9.101683] ata9: SATA link down (SStatus 0 SControl 300) [ 9.421677] ata10: SATA link down (SStatus 0 SControl 300) [ 9.741676] ata11: SATA link down (SStatus 0 SControl 300) [ 10.061680] ata12: SATA link down (SStatus 0 SControl 300) [ 10.381683] ata13: SATA link down (SStatus 0 SControl 300) [ 10.701674] ata14: SATA link down (SStatus 0 SControl 300) [ 11.021676] ata15: SATA link down (SStatus 0 SControl 300) [ 11.341681] ata16: SATA link down (SStatus 0 SControl 300) [ 11.661678] ata17: SATA link down (SStatus 0 SControl 300) [ 11.981672] ata18: SATA link down (SStatus 0 SControl 300) [ 12.301666] ata19: SATA link down (SStatus 0 SControl 300) [ 12.621682] ata20: SATA link down (SStatus 0 SControl 300) [ 12.941675] ata21: SATA link down (SStatus 0 SControl 300) [ 13.261675] ata22: SATA link down (SStatus 0 SControl 300) [ 13.581677] ata23: SATA link down (SStatus 0 SControl 300) [ 13.901678] ata24: SATA link down (SStatus 0 SControl 300) [ 13.923577] usbcore: registered new interface driver usbhid [ 13.930662] usbhid: USB HID core driver [ 13.946733] input: DELL DELL USB Keyboard as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:2005.0001/input/input0 [ 14.011758] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 14.021086] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 14.023985] hid-generic 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-fe980000.usb-1.2/input0 [ 14.026500] sd 1:0:0:0: [sda] Write Protect is off [ 14.048206] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.048356] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.059171] sd 1:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 14.122734] sda: sda1 [ 14.127121] sd 1:0:0:0: [sda] Attached SCSI disk [ 14.688008] EXT4-fs (mmcblk1p2): mounted filesystem d560ef65-bdf5-43d6-9524-aebc17f1ca52 r/w with ordered data mode. Quota mode: none. [ 15.132812] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 15.370928] systemd[1]: System time before build time, advancing clock. [ 15.413828] systemd[1]: Inserted module 'autofs4' [ 15.478027] systemd[1]: systemd 254.5-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 15.514331] systemd[1]: Detected architecture arm64. [ 15.541304] systemd[1]: Hostname set to . [ 16.190793] systemd[1]: Queued start job for default target graphical.target. [ 16.221736] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 16.253659] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 16.285698] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 16.317626] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 16.349199] systemd[1]: Created slice user.slice - User and Session Slice. [ 16.375875] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 16.407724] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 16.440502] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 16.475606] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 16.503491] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 16.535493] systemd[1]: Reached target paths.target - Path Units. [ 16.559473] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 16.587424] systemd[1]: Reached target slices.target - Slice Units. [ 16.611463] systemd[1]: Reached target swap.target - Swaps. [ 16.635483] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 16.664277] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 16.695806] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 16.728351] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 16.760328] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 16.789092] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 16.820234] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 16.871712] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 16.905148] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 16.937269] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 16.969348] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 17.001943] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 17.037714] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 17.074130] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 17.110009] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 17.140867] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 17.143406] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 17.153454] device-mapper: uevent: version 1.0.3 [ 17.174424] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 17.207142] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 17.246247] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 17.259054] fuse: init (API version 7.38) [ 17.279893] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 17.289351] loop: module loaded [ 17.309104] systemd[1]: Starting systemd-journald.service - Journal Service... [ 17.347508] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 17.379743] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f). [ 17.401454] systemd-journald[297]: Collecting audit messages is disabled. [ 17.412927] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 17.453962] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 17.479749] EXT4-fs (mmcblk1p2): re-mounted d560ef65-bdf5-43d6-9524-aebc17f1ca52 r/w. Quota mode: none. [ 17.503679] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 17.536302] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 17.568312] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 17.596050] systemd[1]: Started systemd-journald.service - Journal Service. [ 18.004557] systemd-journald[297]: Received client request to flush runtime journal. [ 18.062395] systemd-journald[297]: /var/log/journal/201dbff72fac46fcb6c866a9bff0c46f/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating. [ 18.081598] systemd-journald[297]: Rotating system journal. [ 19.008268] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 19.368225] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 19.397098] iproc-rng200 fe104000.rng: hwrng registered [ 19.442597] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 19.545921] [drm] Initialized v3d 1.0.0 20180419 for fec00000.gpu on minor 0 [ 19.671587] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 19.680472] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 19.699145] mc: Linux media interface: v0.10 [ 19.710708] bcm2835_audio bcm2835_audio: card created with 8 channels [ 19.750194] videodev: Linux video capture interface: v2.00 [ 19.793564] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 19.806446] Console: switching to colour dummy device 80x25 [ 19.820379] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 19.862251] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 19.869899] Registered IR keymap rc-cec [ 19.874493] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 19.882246] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input1 [ 19.893899] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 19.902414] Registered IR keymap rc-cec [ 19.906472] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 19.913813] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input2 [ 19.924965] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 19.932042] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 19.938935] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 19.946380] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 19.954269] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 19.962038] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 19.972443] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 20.028987] jitterentropy: Initialization failed with host not compliant with requirements: 9 [ 20.030944] vc4-drm gpu: [drm] The core clock cannot reach frequencies high enough to support 4k @ 60Hz. [ 20.047330] vc4-drm gpu: [drm] Please change your config.txt file to add hdmi_enable_4kp60. [ 20.082652] Console: switching to colour frame buffer device 240x67 [ 20.108654] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 20.109021] DRBG: Continuing without Jitter RNG [ 20.222955] Bluetooth: Core ver 2.22 [ 20.227124] NET: Registered PF_BLUETOOTH protocol family [ 20.233101] Bluetooth: HCI device and connection manager initialized [ 20.240211] Bluetooth: HCI socket layer initialized [ 20.245831] Bluetooth: L2CAP socket layer initialized [ 20.251028] Bluetooth: SCO socket layer initialized [ 20.298845] Bluetooth: HCI UART driver ver 2.3 [ 20.303420] Bluetooth: HCI UART protocol H4 registered [ 20.308789] Bluetooth: HCI UART protocol LL registered [ 20.313119] audit: type=1400 audit(1696070083.939:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=471 comm="apparmor_parser" [ 20.314053] Bluetooth: HCI UART protocol ATH3K registered [ 20.329279] audit: type=1400 audit(1696070083.939:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=472 comm="apparmor_parser" [ 20.334727] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 20.350206] audit: type=1400 audit(1696070083.939:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=472 comm="apparmor_parser" [ 20.356816] Bluetooth: HCI UART protocol Intel registered [ 20.378559] Bluetooth: HCI UART protocol Broadcom registered [ 20.380001] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 20.385147] Bluetooth: HCI UART protocol QCA registered [ 20.388245] audit: type=1400 audit(1696070084.015:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser" [ 20.388262] audit: type=1400 audit(1696070084.015:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=473 comm="apparmor_parser" [ 20.388266] audit: type=1400 audit(1696070084.015:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser" [ 20.388270] audit: type=1400 audit(1696070084.015:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=473 comm="apparmor_parser" [ 20.395982] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 20.398502] Bluetooth: HCI UART protocol AG6XX registered [ 20.484754] Bluetooth: HCI UART protocol Marvell registered [ 20.535410] uart-pl011 fe201000.serial: no DMA platform data [ 21.411872] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 21.482468] bcmgenet fd580000.ethernet eth0: Link is Down [ 22.659284] Bluetooth: hci0: command 0xfc18 tx timeout [ 30.691309] Bluetooth: hci0: BCM: failed to write update baudrate (-110) [ 30.698225] Bluetooth: hci0: Failed to set baudrate [ 32.707295] Bluetooth: hci0: command 0x0c03 tx timeout [ 34.787914] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 40.931295] Bluetooth: hci0: BCM: Reset failed (-110)