backup info: network backup info: chain *************************************************************** * RASPIBLITZ DEBUG LOGS *************************************************************** blitzversion: 1.12.0 commit-release: 7db2 commit-active: 7db2aa2b chainnetwork: bitcoin / test 23:23:20 up 6 min, 1 user, load average: 1.19, 0.98, 0.49 *** FAILED SERVICES *** list any servcies with problems: sudo systemctl list-units --failed UNIT LOAD ACTIVE SUB DESCRIPTION ● bootstrap.service loaded failed failed execute on every startup before everything else ● smartmontools.service loaded failed failed Self Monitoring and Reporting Technology (SMART) Daemon LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** SETUPPHASE / BOOTSTRAP *** see logs: cat /home/admin/raspiblitz.log setupPhase--> setup state--> error #### SYSTEM #### # systemDevice() systemWarning() SYSTEM: setup SYSTEM skipped - already mounted #### DATA #### # dataDevice() dataWarning() DATA: setup DATA skipped - already mounted scenario(setup) systemCopy() uploadMigration() storagePartition(sda3) ## 2nd WAIT LOOP: AFTER HDD/SETUP state(waitprovision) ## 2nd WAIT LOOP: DONE OK - no migration file found ## SETTING PASSWORD FOR ADMIN NO systemCopy # blitz.data.sh mount # checking disk data ... please wait # storageDevice(sda) error='storagePartition not detected' FAIL: blitz.data.sh mount failed *** BACKGROUNDSERVICE *** to monitor Background service call: sudo journalctl -f -u background *** BLOCKCHAIN (MAINNET) SYSTEMD STATUS *** *** LAST BLOCKCHAIN (MAINNET) ERROR LOGS *** sudo journalctl -u bitcoind -b --no-pager -n20 -- No entries -- *** LAST BLOCKCHAIN (MAINNET) INFO LOGS *** sudo tail -n 50 /mnt/hdd/app-data/bitcoin/debug.log *** LND (MAINNET) SYSTEMD STATUS *** - OFF by config - *** CORE LIGHTNING (MAINNET) SYSTEMD STATUS *** - not activated - *** BLOCKCHAIN (TESTNET) SYSTEMD STATUS *** - OFF by config - *** LND (TESTNET) SYSTEMD STATUS *** - OFF by config - *** CORE LIGHTNING (TESTNET) SYSTEMD STATUS *** - not activated - *** BLOCKCHAIN (SIGNET) SYSTEMD STATUS *** - OFF by config - *** LND (SIGNET) SYSTEMD STATUS *** - OFF by config - *** CORE LIGHTNING (SIGNET) SYSTEMD STATUS *** - not activated - *** NGINX SYSTEMD STATUS *** ● nginx.service - A high performance web server and a reverse proxy server Loaded: loaded (/lib/systemd/system/nginx.service; enabled; preset: enabled) Drop-In: /etc/systemd/system/nginx.service.d └─raspiblitz.conf Active: active (running) since Wed 2025-12-31 23:16:48 GMT; 6min ago Docs: man:nginx(8) Process: 1479 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS) Process: 1572 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS) Main PID: 1574 (nginx) Tasks: 5 (limit: 9293) CPU: 76ms CGroup: /system.slice/nginx.service ├─1574 "nginx: master process /usr/sbin/nginx -g daemon on; master_process on;" ├─1576 "nginx: worker process" ├─1577 "nginx: worker process" ├─1579 "nginx: worker process" └─1581 "nginx: worker process" Dec 31 23:16:47 raspberrypi systemd[1]: Starting nginx.service - A high performance web server and a reverse proxy server... Dec 31 23:16:48 raspberrypi systemd[1]: Started nginx.service - A high performance web server and a reverse proxy server. *** LAST NGINX LOGS *** sudo journalctl -u nginx -b --no-pager -n20 Dec 31 23:16:47 raspberrypi systemd[1]: Starting nginx.service - A high performance web server and a reverse proxy server... Dec 31 23:16:48 raspberrypi systemd[1]: Started nginx.service - A high performance web server and a reverse proxy server. --> CHECK CONFIG: sudo nginx -t nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful *** BLITZAPI STATUS *** installed=0 - BLITZAPI is not running *** BLITZ WebUI STATUS *** installed=0 - TOUCHSCREEN is OFF by config - Loop is OFF by config - LND-RTL is OFF by config - CL-RTL is OFF by config - Electrum Rust Server is OFF by config - LIT is OFF by config - LNDg is OFF by config * BTCPayServer is OFF by config * BTC-RPC-Explorer is OFF by config - LNbits is OFF by config - Thunderhub is OFF by config - SPECTER is OFF by config - SPHINX is OFF by config - FINTS is OFF by config - PUBLICPOOL is OFF by config *** MOUNTED DRIVES *** df -T -h Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.8G 0 3.8G 0% /dev tmpfs tmpfs 783M 9.1M 774M 2% /run /dev/mmcblk0p2 ext4 59G 4.6G 52G 9% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 64M 12K 64M 1% /var/cache/raspiblitz /dev/mmcblk0p1 vfat 510M 58M 453M 12% /boot/firmware tmpfs tmpfs 783M 12K 783M 1% /run/user/1001 *** SD CARD HOMES *** sudo du -ahd1 /home 339M /home/admin 33M /home/pi 24K /home/bitcoin 372M /home *** LOGFILES *** Archived and active journals take up 8.0M in the file system. 1.5M /var/log *** HDD/SSD/NVMe *** # blitz.data.sh status # check device(sda) for boot partition # check device(mmcblk0) for boot partition # Checking partition sda2 (60GB) on sda mounted at /mnt/temp # - no data found on partition # Checking partition sda3 (871GB) on sda mounted at /mnt/temp # - STORAGE partition # - skipping data inspect - use '-inspect' to copy data to RAMDISK for inspection # RESULT AFTER DETECTION # dataDevice: (GB) () # storageDevice: sda (871GB) () # systemDevice: (GB) () # installDevice: mmcblk0 (1) (0) # biggerDevice: (GB) # combinedDataStorage: 1 # NO LAYOUT PROPOSAL ... using existing drive layout # RaspberryPi4 - set systemCopy to 0 scenario='setup' scenarioSystemCopy='0' storageDevice='sda' storageDeviceName='usb-JMicron_Tech_DD564198845AA-0:0' storageSizeGB='871' storagePrunedMinGB='160' storageFullMinGB='922' storageFreeKB='' storageUsePercent='0' storageCelsius='' storageWarning='only-pruned' storagePartition='sda3' storagePartitionsCount='3' storageMountedPath='' storageBlockchainGB='0' storageMigration='' storageUnusedSpacePercent='0' systemDevice='' systemDeviceName='' systemSizeGB='' systemMinGB='32' systemFreeKB='' systemWarning='' systemUsePercent='' systemCelsius='' systemPartition='' systemPartitionsCount='0' systemMountedPath='' systemUnusedSpacePercent='0' dataDevice='' dataDeviceName='' dataSizeGB='' dataMinGB='32' dataFreeKB='' dataWarning='' dataUsePercent='0' dataCelsius='' dataPartition='sda3' dataPartitionsCount='0' dataMountedPath='' dataConfigFound='0' dataInspectSuccess='0' dataUnusedSpacePercent='0' installDevice='mmcblk0' installDeviceActive='1' installDeviceReadOnly='0' biggerDevice='' biggerDeviceName='' biggerSizeGB='' combinedDataStorage='1' bootFromStorage='0' bootFromSD='1' swapActive='0' smartctl 7.3 2022-02-28 r5338 [aarch64-linux-6.12.34+rpt-rpi-v8] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: JMicron Product: Tech Revision: 0214 Compliance: SPC-4 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Logical block size: 512 bytes Physical block size: 4096 bytes LU is fully provisioned Rotation Rate: Solid State Device Logical Unit id: 0x3044564198845110 Serial number: DD564198845AA Device type: disk Local Time is: Wed Dec 31 23:23:22 2025 GMT SMART support is: Unavailable - device lacks SMART capability. === START OF READ SMART DATA SECTION === Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported Device does not support Self Test logging *** NETWORK *** localip=*.*.*.* localiprange=*.*.*.*/24 dhcp=1 network_device=eth0 *** ZRAM *** downloaded=0 serviceLoaded=0 serviceActive=0 *** HARDWARE TEST RESULTS *** throttled=0x0 UndervoltageReports in Logs: 0 *** SYSTEM CACHE STATUS *** system_setup_systemSizeGB="" system_setup_installDeviceReadOnly="0" system_up="388" system_ram_mb="7820" system_setup_systemWarning="" system_setup_combinedDataStorage="1" system_setup_storagePartitionsCount="3" system_temp_celsius="52" system_up_text="6m" system_setup_dataDeviceName="" system_setup_systemDeviceName="usb-JMicron_Tech_DD564198845AA-0:0" system_setup_cleanDrives="0" system_setup_systemDevice="" system_setup_secondtry="0" system_setup_storageSizeGB="932" system_setup_bootFromStorage="0" system_ram_available_mb="7502" system_setup_dataDevice="" system_cpu_load=" 1.19, 0.98, 0.49" system_setup_dataWarning="" system_setup_installDevice="mmcblk0" system_setup_dataSizeGB="" system_ups_status="OFF" system_setup_storageDeviceName="usb-JMicron_Tech_DD564198845AA-0:0" system_setup_storageBlockchainGB="0" system_setup_storageMigration="" system_setup_storageWarning="" system_count_undervoltage="0" system_setup_storageDevice="sda" system_ram_gb="8" system_temp_fahrenheit="126" system_setup_askSystemCopy="0" system_ups_battery="" system_init_time="1767223007" *** POSSIBLE ERROR REPORTS *** *** OPTION: SHARE THIS DEBUG OUTPUT *** An easy way to share this debug output on GitHub or on a support chat Use the following command and share the resulting link using termbin.com service and tor proxy: debug -l If tor is failing and you don't mind leaking your ip address to the termbin service, use without tor: debug -l -n