[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13 [ 0.000000] Linux version 5.10.0-21-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.162-1 (2023-01-21) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-21-amd64 root=UUID=da505dcf-a9cb-476d-8e2b-5bd30d255bd5 ro [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9ab1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9ab2000-0x00000000da223fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da224000-0x00000000da23dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da23e000-0x00000000dc20afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dc20b000-0x00000000dc333fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dc334000-0x00000000dc3cefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000dc3cf000-0x00000000dc3cffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dc3d0000-0x00000000dc412fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dc413000-0x00000000dcbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xda229000 ACPI 2.0=0xda229000 SMBIOS=0xdc332018 MOKvar=0xd782a000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 3227A55/MAHOBAY, BIOS 9SKT9CAUS 12/11/2018 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3292.388 MHz processor [ 0.000064] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000067] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000076] last_pfn = 0x21e600 max_arch_pfn = 0x400000000 [ 0.000080] MTRR default type: uncachable [ 0.000081] MTRR fixed ranges enabled: [ 0.000082] 00000-9FFFF write-back [ 0.000083] A0000-DFFFF uncachable [ 0.000084] E0000-FFFFF write-protect [ 0.000085] MTRR variable ranges enabled: [ 0.000086] 0 base 000000000 mask E00000000 write-back [ 0.000087] 1 base 200000000 mask FE0000000 write-back [ 0.000088] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000089] 3 base 0DE000000 mask FFE000000 uncachable [ 0.000090] 4 base 0DD800000 mask FFF800000 uncachable [ 0.000091] 5 base 21F000000 mask FFF000000 uncachable [ 0.000092] 6 base 21E800000 mask FFF800000 uncachable [ 0.000093] 7 base 21E600000 mask FFFE00000 uncachable [ 0.000094] 8 disabled [ 0.000094] 9 disabled [ 0.000380] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000852] e820: update [mem 0xdd800000-0xffffffff] usable ==> reserved [ 0.000857] last_pfn = 0xdcc00 max_arch_pfn = 0x400000000 [ 0.010440] e820: update [mem 0xd782a000-0xd782cfff] usable ==> reserved [ 0.011179] RAMDISK: [mem 0x31d9b000-0x34ec4fff] [ 0.011184] ACPI: Early table checksum verification disabled [ 0.011187] ACPI: RSDP 0x00000000DA229000 000024 (v02 LENOVO) [ 0.011191] ACPI: XSDT 0x00000000DA229088 00008C (v01 LENOVO TC-9S 00001620 AMI 00010013) [ 0.011196] ACPI: FACP 0x00000000DA23B640 00010C (v05 LENOVO TC-9S 00001620 AMI 00010013) [ 0.011202] ACPI: DSDT 0x00000000DA2291A0 01249E (v02 LENOVO TC-9S 00001620 INTL 20051117) [ 0.011206] ACPI: FACS 0x00000000DC1F8080 000040 [ 0.011209] ACPI: APIC 0x00000000DA23B750 000072 (v03 LENOVO TC-9S 00001620 AMI 00010013) [ 0.011213] ACPI: FPDT 0x00000000DA23B7C8 000044 (v01 LENOVO TC-9S 00001620 AMI 00010013) [ 0.011216] ACPI: MCFG 0x00000000DA23B810 00003C (v01 LENOVO TC-9S 00001620 MSFT 00000097) [ 0.011220] ACPI: SLIC 0x00000000DA23B850 000176 (v01 LENOVO TC-9S 00001620 AMI 00010013) [ 0.011223] ACPI: HPET 0x00000000DA23B9C8 000038 (v01 LENOVO TC-9S 00001620 AMI. 00000005) [ 0.011227] ACPI: SSDT 0x00000000DA23BA00 00036D (v01 LENOVO TC-9S 00001620 INTL 20091112) [ 0.011230] ACPI: SSDT 0x00000000DA23BD70 0009AA (v01 LENOVO TC-9S 00001620 INTL 20051117) [ 0.011234] ACPI: SSDT 0x00000000DA23C720 000B22 (v01 LENOVO TC-9S 00001620 INTL 20051117) [ 0.011237] ACPI: DMAR 0x00000000DA23D248 0000B8 (v01 LENOVO TC-9S 00001620 INTL 00000001) [ 0.011241] ACPI: ASF! 0x00000000DA23D300 0000A5 (v32 LENOVO TC-9S 00001620 TFSM 000F4240) [ 0.011244] ACPI: BGRT 0x00000000DA23D3A8 000038 (v00 LENOVO TC-9S 00001620 AMI 00010013) [ 0.011248] ACPI: TCPA 0x00000000DA23D3E0 000032 (v02 LENOVO TC-9S 00001620 MSFT 01000013) [ 0.011251] ACPI: Reserving FACP table memory at [mem 0xda23b640-0xda23b74b] [ 0.011253] ACPI: Reserving DSDT table memory at [mem 0xda2291a0-0xda23b63d] [ 0.011254] ACPI: Reserving FACS table memory at [mem 0xdc1f8080-0xdc1f80bf] [ 0.011255] ACPI: Reserving APIC table memory at [mem 0xda23b750-0xda23b7c1] [ 0.011256] ACPI: Reserving FPDT table memory at [mem 0xda23b7c8-0xda23b80b] [ 0.011257] ACPI: Reserving MCFG table memory at [mem 0xda23b810-0xda23b84b] [ 0.011259] ACPI: Reserving SLIC table memory at [mem 0xda23b850-0xda23b9c5] [ 0.011260] ACPI: Reserving HPET table memory at [mem 0xda23b9c8-0xda23b9ff] [ 0.011261] ACPI: Reserving SSDT table memory at [mem 0xda23ba00-0xda23bd6c] [ 0.011262] ACPI: Reserving SSDT table memory at [mem 0xda23bd70-0xda23c719] [ 0.011264] ACPI: Reserving SSDT table memory at [mem 0xda23c720-0xda23d241] [ 0.011265] ACPI: Reserving DMAR table memory at [mem 0xda23d248-0xda23d2ff] [ 0.011266] ACPI: Reserving ASF! table memory at [mem 0xda23d300-0xda23d3a4] [ 0.011267] ACPI: Reserving BGRT table memory at [mem 0xda23d3a8-0xda23d3df] [ 0.011268] ACPI: Reserving TCPA table memory at [mem 0xda23d3e0-0xda23d411] [ 0.011279] ACPI: Local APIC address 0xfee00000 [ 0.011325] No NUMA configuration found [ 0.011327] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff] [ 0.011337] NODE_DATA(0) allocated [mem 0x21e5d2000-0x21e5fbfff] [ 0.011726] Zone ranges: [ 0.011727] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011729] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011730] Normal [mem 0x0000000100000000-0x000000021e5fffff] [ 0.011732] Device empty [ 0.011733] Movable zone start for each node [ 0.011736] Early memory node ranges [ 0.011738] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.011739] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.011740] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.011741] node 0: [mem 0x0000000040005000-0x00000000d9ab1fff] [ 0.011743] node 0: [mem 0x00000000dc3cf000-0x00000000dc3cffff] [ 0.011744] node 0: [mem 0x00000000dc413000-0x00000000dcbfffff] [ 0.011745] node 0: [mem 0x0000000100000000-0x000000021e5fffff] [ 0.011747] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff] [ 0.011749] On node 0 totalpages: 2065980 [ 0.011750] DMA zone: 64 pages used for memmap [ 0.011751] DMA zone: 280 pages reserved [ 0.011751] DMA zone: 3997 pages, LIFO batch:0 [ 0.011753] DMA32 zone: 13891 pages used for memmap [ 0.011753] DMA32 zone: 888991 pages, LIFO batch:63 [ 0.011754] Normal zone: 18328 pages used for memmap [ 0.011755] Normal zone: 1172992 pages, LIFO batch:63 [ 0.011758] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.011791] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.013996] On node 0, zone DMA32: 512 pages in unavailable ranges [ 0.019455] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.019559] On node 0, zone DMA32: 10525 pages in unavailable ranges [ 0.019580] On node 0, zone DMA32: 67 pages in unavailable ranges [ 0.019995] On node 0, zone Normal: 13312 pages in unavailable ranges [ 0.020060] On node 0, zone Normal: 6656 pages in unavailable ranges [ 0.020071] Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff] [ 0.020200] ACPI: PM-Timer IO Port: 0x408 [ 0.020203] ACPI: Local APIC address 0xfee00000 [ 0.020208] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.020223] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.020225] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.020227] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.020229] ACPI: IRQ0 used by override. [ 0.020230] ACPI: IRQ9 used by override. [ 0.020231] Using ACPI (MADT) for SMP configuration information [ 0.020233] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.020242] e820: update [mem 0xd7cd6000-0xd7d1dfff] usable ==> reserved [ 0.020254] TSC deadline timer available [ 0.020256] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.020278] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.020280] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.020281] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.020283] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.020285] PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.020287] PM: hibernation: Registered nosave memory: [mem 0xd782a000-0xd782cfff] [ 0.020289] PM: hibernation: Registered nosave memory: [mem 0xd7cd6000-0xd7d1dfff] [ 0.020291] PM: hibernation: Registered nosave memory: [mem 0xd9ab2000-0xda223fff] [ 0.020292] PM: hibernation: Registered nosave memory: [mem 0xda224000-0xda23dfff] [ 0.020293] PM: hibernation: Registered nosave memory: [mem 0xda23e000-0xdc20afff] [ 0.020294] PM: hibernation: Registered nosave memory: [mem 0xdc20b000-0xdc333fff] [ 0.020295] PM: hibernation: Registered nosave memory: [mem 0xdc334000-0xdc3cefff] [ 0.020297] PM: hibernation: Registered nosave memory: [mem 0xdc3d0000-0xdc412fff] [ 0.020300] PM: hibernation: Registered nosave memory: [mem 0xdcc00000-0xdcffffff] [ 0.020301] PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdf9fffff] [ 0.020302] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.020303] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.020304] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.020305] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.020306] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.020307] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.020308] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.020309] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] [ 0.020310] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.020311] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.020312] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.020313] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.020315] [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.020317] Booting paravirtualized kernel on bare hardware [ 0.020320] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.023825] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.024028] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288 [ 0.024035] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152 [ 0.024036] pcpu-alloc: [0] 0 1 2 3 [ 0.024066] Built 1 zonelists, mobility grouping on. Total pages: 2033417 [ 0.024067] Policy zone: Normal [ 0.024069] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-21-amd64 root=UUID=da505dcf-a9cb-476d-8e2b-5bd30d255bd5 ro [ 0.024526] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.024743] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.024791] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.040934] Memory: 3546748K/8263920K available (12295K kernel code, 2537K rwdata, 7560K rodata, 2660K init, 5468K bss, 337944K reserved, 0K cma-reserved) [ 0.041147] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.041162] Kernel/User page tables isolation: enabled [ 0.041177] ftrace: allocating 36545 entries in 143 pages [ 0.057178] ftrace: allocated 143 pages with 5 groups [ 0.057287] rcu: Hierarchical RCU implementation. [ 0.057289] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.057290] Rude variant of Tasks RCU enabled. [ 0.057291] Tracing variant of Tasks RCU enabled. [ 0.057292] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.057293] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.061071] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.061283] random: crng init done [ 0.061303] Console: colour dummy device 80x25 [ 0.061537] printk: console [tty0] enabled [ 0.061551] ACPI: Core revision 20200925 [ 0.061659] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.061678] APIC: Switch to symmetric I/O mode setup [ 0.061681] DMAR: Host address width 36 [ 0.061683] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.061689] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.061692] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.061695] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f010da [ 0.061698] DMAR: RMRR base: 0x000000d9f4d000 end: 0x000000d9f81fff [ 0.061701] DMAR: RMRR base: 0x000000dd800000 end: 0x000000df9fffff [ 0.061704] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.061706] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.061708] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.062219] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.062223] x2apic enabled [ 0.062233] Switched APIC routing to cluster x2apic. [ 0.062678] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081681] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f7535a4834, max_idle_ns: 440795287936 ns [ 0.081687] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.77 BogoMIPS (lpj=13169552) [ 0.081691] pid_max: default: 32768 minimum: 301 [ 0.083731] LSM: Security Framework initializing [ 0.083742] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.083768] AppArmor: AppArmor initialized [ 0.083771] TOMOYO Linux initialized [ 0.083800] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.083820] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.084046] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.084058] process: using mwait in idle threads [ 0.084061] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.084063] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.084067] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.084071] Spectre V2 : Mitigation: Retpolines [ 0.084072] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.084075] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.084077] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.084080] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.084083] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.084087] MDS: Mitigation: Clear CPU buffers [ 0.084088] MMIO Stale Data: Unknown: No mitigations [ 0.084090] SRBDS: Vulnerable: No microcode [ 0.093216] Freeing SMP alternatives memory: 32K [ 0.097490] smpboot: CPU0: Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.097600] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.097609] ... version: 3 [ 0.097611] ... bit width: 48 [ 0.097612] ... generic registers: 8 [ 0.097614] ... value mask: 0000ffffffffffff [ 0.097615] ... max period: 00007fffffffffff [ 0.097617] ... fixed-purpose events: 3 [ 0.097618] ... event mask: 00000007000000ff [ 0.097685] rcu: Hierarchical SRCU implementation. [ 0.097685] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.097685] smp: Bringing up secondary CPUs ... [ 0.097685] x86: Booting SMP configuration: [ 0.097685] .... node #0, CPUs: #1 #2 #3 [ 0.101742] smp: Brought up 1 node, 4 CPUs [ 0.101742] smpboot: Max logical packages: 1 [ 0.101742] smpboot: Total of 4 processors activated (26339.10 BogoMIPS) [ 0.110451] node 0 deferred pages initialised in 8ms [ 0.111342] devtmpfs: initialized [ 0.111342] x86/mm: Memory block size: 128MB [ 0.111342] PM: Registering ACPI NVS region [mem 0xda23e000-0xdc20afff] (33345536 bytes) [ 0.111342] PM: Registering ACPI NVS region [mem 0xdc3d0000-0xdc412fff] (274432 bytes) [ 0.111342] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.111342] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.111342] pinctrl core: initialized pinctrl subsystem [ 0.111342] NET: Registered protocol family 16 [ 0.111342] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.111342] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.111342] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.111342] audit: initializing netlink subsys (disabled) [ 0.111342] audit: type=2000 audit(1679972729.048:1): state=initialized audit_enabled=0 res=1 [ 0.111342] thermal_sys: Registered thermal governor 'fair_share' [ 0.111342] thermal_sys: Registered thermal governor 'bang_bang' [ 0.111342] thermal_sys: Registered thermal governor 'step_wise' [ 0.111342] thermal_sys: Registered thermal governor 'user_space' [ 0.111342] thermal_sys: Registered thermal governor 'power_allocator' [ 0.111342] cpuidle: using governor ladder [ 0.111342] cpuidle: using governor menu [ 0.111342] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.111342] ACPI: bus type PCI registered [ 0.111342] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.111342] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.111342] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.111342] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.111342] PCI: Using configuration type 1 for base access [ 0.111342] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.113791] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.114238] Kprobes globally optimized [ 0.114243] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.242755] ACPI: Added _OSI(Module Device) [ 0.242755] ACPI: Added _OSI(Processor Device) [ 0.242755] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.242755] ACPI: Added _OSI(Processor Aggregator Device) [ 0.242755] ACPI: Added _OSI(Linux-Dell-Video) [ 0.242755] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.242755] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.247959] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.249192] ACPI: Dynamic OEM Table Load: [ 0.249199] ACPI: SSDT 0xFFFF93BE80B2C000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.249766] ACPI: Dynamic OEM Table Load: [ 0.249771] ACPI: SSDT 0xFFFF93BE80B33400 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.250225] ACPI: Dynamic OEM Table Load: [ 0.250230] ACPI: SSDT 0xFFFF93BE80EB4200 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.251649] ACPI: Interpreter enabled [ 0.251673] ACPI: (supports S0 S3 S4 S5) [ 0.251675] ACPI: Using IOAPIC for interrupt routing [ 0.251697] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.252119] ACPI: Enabled 17 GPEs in block 00 to 3F [ 0.258433] ACPI: Power Resource [FN00] (off) [ 0.258495] ACPI: Power Resource [FN01] (off) [ 0.258555] ACPI: Power Resource [FN02] (off) [ 0.258613] ACPI: Power Resource [FN03] (off) [ 0.258671] ACPI: Power Resource [FN04] (off) [ 0.258969] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.259219] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.259225] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.259414] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.259521] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.259524] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.259892] PCI host bridge to bus 0000:00 [ 0.259895] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.259898] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.259900] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.259902] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.259905] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.259907] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.259909] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.259912] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.259914] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.259916] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.259919] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.259921] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.259923] pci_bus 0000:00: root bus resource [mem 0x21e600000-0x61e5fffff window] [ 0.259926] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.259940] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.260020] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 [ 0.260030] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.260036] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.260041] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.260052] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.260160] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.260180] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit] [ 0.260248] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.260335] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.260355] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c00f 64bit] [ 0.260427] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.260502] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002 [ 0.260516] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.260524] pci 0000:00:16.3: reg 0x14: [mem 0xf7d3a000-0xf7d3afff] [ 0.260655] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.260669] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff] [ 0.260677] pci 0000:00:19.0: reg 0x14: [mem 0xf7d39000-0xf7d39fff] [ 0.260685] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.260741] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.260821] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.260837] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d38000-0xf7d383ff] [ 0.260917] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.261002] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.261017] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit] [ 0.261084] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.261178] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.261328] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.261363] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.261367] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.261473] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.261624] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.261656] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.261659] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.261762] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.261778] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d37000-0xf7d373ff] [ 0.261858] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.261938] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.262059] pci 0000:00:1f.0: [8086:1e53] type 00 class 0x060100 [ 0.262232] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.262245] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.262253] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.262261] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.262269] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.262277] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.262285] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d36000-0xf7d367ff] [ 0.262324] pci 0000:00:1f.2: PME# supported from D3hot [ 0.262399] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.262416] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d35000-0xf7d350ff 64bit] [ 0.262436] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.262576] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.262771] pci 0000:02:00.0: [8086:2723] type 00 class 0x028000 [ 0.262864] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.264865] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.265217] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.265229] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.265254] pci_bus 0000:03: extended config space not accessible [ 0.265302] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.265312] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.265315] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.265317] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.265320] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) [ 0.265322] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode) [ 0.265325] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) [ 0.265327] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode) [ 0.265330] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.265332] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.265335] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.265337] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.265340] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode) [ 0.265343] pci 0000:00:1e.0: bridge window [mem 0x21e600000-0x61e5fffff window] (subtractive decode) [ 0.269913] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.269963] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270013] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270063] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270113] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270163] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270212] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270261] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270565] iommu: Default domain type: Translated [ 0.270579] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.270579] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.270579] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.270579] vgaarb: loaded [ 0.270579] EDAC MC: Ver: 3.0.0 [ 0.270579] Registered efivars operations [ 0.270579] NetLabel: Initializing [ 0.270579] NetLabel: domain hash size = 128 [ 0.270579] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.270579] NetLabel: unlabeled traffic allowed by default [ 0.270579] PCI: Using ACPI for IRQ routing [ 0.271216] PCI: pci_cache_line_size set to 64 bytes [ 0.271278] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.271279] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.271280] e820: reserve RAM buffer [mem 0xd782a000-0xd7ffffff] [ 0.271281] e820: reserve RAM buffer [mem 0xd7cd6000-0xd7ffffff] [ 0.271281] e820: reserve RAM buffer [mem 0xd9ab2000-0xdbffffff] [ 0.271282] e820: reserve RAM buffer [mem 0xdc3d0000-0xdfffffff] [ 0.271283] e820: reserve RAM buffer [mem 0xdcc00000-0xdfffffff] [ 0.271284] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff] [ 0.272043] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.272051] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.274713] clocksource: Switched to clocksource tsc-early [ 0.281876] VFS: Disk quotas dquot_6.6.0 [ 0.281892] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.281989] AppArmor: AppArmor Filesystem Enabled [ 0.282008] pnp: PnP ACPI init [ 0.282146] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.282150] system 00:00: [io 0x1100-0x110f] has been reserved [ 0.282152] system 00:00: [io 0xffff] has been reserved [ 0.282154] system 00:00: [io 0xffff] has been reserved [ 0.282156] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.282161] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.282163] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.282165] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.282172] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.282190] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.282229] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.282234] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.282361] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.282364] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.282366] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.282368] system 00:03: [io 0x0218-0x0219] has been reserved [ 0.282372] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.282418] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.282423] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.282578] pnp 00:05: [dma 0 disabled] [ 0.282608] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.282826] pnp 00:06: [dma 0 disabled] [ 0.282852] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.282993] pnp 00:07: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.283151] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.283155] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.283157] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.283159] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.283162] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.283164] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.283166] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.283168] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.283171] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.283173] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.283175] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.283180] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.283330] system 00:09: [mem 0x20000000-0x201fffff] has been reserved [ 0.283333] system 00:09: [mem 0x40004000-0x40004fff] has been reserved [ 0.283337] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.283375] pnp: PnP ACPI: found 10 devices [ 0.288877] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.288926] NET: Registered protocol family 2 [ 0.289005] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.290013] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.290064] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.290182] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.290247] TCP: Hash tables configured (established 65536 bind 65536) [ 0.290278] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.290299] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.290336] NET: Registered protocol family 1 [ 0.290341] NET: Registered protocol family 44 [ 0.290353] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.290374] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.290382] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.290394] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.290405] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.290407] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.290409] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.290411] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.290413] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.290415] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.290418] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.290420] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.290422] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.290424] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.290426] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.290428] pci_bus 0000:00: resource 15 [mem 0xdfa00000-0xfeafffff window] [ 0.290430] pci_bus 0000:00: resource 16 [mem 0x21e600000-0x61e5fffff window] [ 0.290433] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.290435] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.290437] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.290439] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.290441] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.290443] pci_bus 0000:03: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.290445] pci_bus 0000:03: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.290447] pci_bus 0000:03: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.290449] pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.290452] pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.290454] pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.290456] pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.290458] pci_bus 0000:03: resource 15 [mem 0xdfa00000-0xfeafffff window] [ 0.290460] pci_bus 0000:03: resource 16 [mem 0x21e600000-0x61e5fffff window] [ 0.290548] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.313787] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x710 took 22509 usecs [ 0.337779] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x710 took 23410 usecs [ 0.337809] pci 0000:02:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.337848] Trying to unpack rootfs image as initramfs... [ 0.900100] Freeing initrd memory: 50344K [ 0.900169] DMAR: No ATSR found [ 0.900196] DMAR: dmar0: Using Queued invalidation [ 0.900204] DMAR: dmar1: Using Queued invalidation [ 0.933879] pci 0000:00:00.0: Adding to iommu group 0 [ 0.933889] pci 0000:00:02.0: Adding to iommu group 1 [ 0.933900] pci 0000:00:14.0: Adding to iommu group 2 [ 0.933912] pci 0000:00:16.0: Adding to iommu group 3 [ 0.933919] pci 0000:00:16.3: Adding to iommu group 3 [ 0.933927] pci 0000:00:19.0: Adding to iommu group 4 [ 0.933935] pci 0000:00:1a.0: Adding to iommu group 5 [ 0.933943] pci 0000:00:1b.0: Adding to iommu group 6 [ 0.933951] pci 0000:00:1c.0: Adding to iommu group 7 [ 0.933959] pci 0000:00:1c.4: Adding to iommu group 8 [ 0.933967] pci 0000:00:1d.0: Adding to iommu group 9 [ 0.933976] pci 0000:00:1e.0: Adding to iommu group 10 [ 0.933990] pci 0000:00:1f.0: Adding to iommu group 11 [ 0.933997] pci 0000:00:1f.2: Adding to iommu group 11 [ 0.934005] pci 0000:00:1f.3: Adding to iommu group 11 [ 0.934013] pci 0000:02:00.0: Adding to iommu group 12 [ 0.935625] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.935628] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.935630] software IO TLB: mapped [mem 0x00000000d37fb000-0x00000000d77fb000] (64MB) [ 0.935967] Initialise system trusted keyrings [ 0.935976] Key type blacklist registered [ 0.936015] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.936847] zbud: loaded [ 0.936972] integrity: Platform Keyring initialized [ 0.936975] Key type asymmetric registered [ 0.936977] Asymmetric key parser 'x509' registered [ 0.936984] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.937010] io scheduler mq-deadline registered [ 0.937741] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.937754] efifb: probing for efifb [ 0.937773] efifb: framebuffer at 0xe0000000, using 6912k, total 6912k [ 0.937776] efifb: mode is 1680x1050x32, linelength=6720, pages=1 [ 0.937777] efifb: scrolling: redraw [ 0.937779] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.940734] Console: switching to colour frame buffer device 210x65 [ 0.943639] fb0: EFI VGA frame buffer device [ 0.943663] intel_idle: MWAIT substates: 0x1120 [ 0.943664] intel_idle: v0.5.1 model 0x3A [ 0.943782] intel_idle: Local APIC timer is reliable in all C-states [ 0.944195] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.944218] ACPI: Thermal Zone [TZ00] (28 C) [ 0.944401] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.944423] ACPI: Thermal Zone [TZ01] (30 C) [ 0.944537] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.944760] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.945334] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.945925] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 0.946232] 0000:00:16.3: ttyS2 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.946474] Linux agpgart interface v0.103 [ 0.946516] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.946785] i8042: PNP: No PS/2 controller found. [ 0.946899] mousedev: PS/2 mouse device common for all mice [ 0.946943] rtc_cmos 00:01: RTC can wake from S4 [ 0.947192] rtc_cmos 00:01: registered as rtc0 [ 0.947277] rtc_cmos 00:01: setting system clock to 2023-03-28T03:05:30 UTC (1679972730) [ 0.947316] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.947349] intel_pstate: Intel P-state driver initializing [ 0.947733] ledtrig-cpu: registered to indicate activity on CPUs [ 0.948032] NET: Registered protocol family 10 [ 0.956836] Segment Routing with IPv6 [ 0.956889] mip6: Mobile IPv6 [ 0.956904] NET: Registered protocol family 17 [ 0.957025] mpls_gso: MPLS GSO support [ 0.957512] microcode: sig=0x306a9, pf=0x2, revision=0x21 [ 0.957580] microcode: Microcode Update Driver: v2.2. [ 0.957583] IPI shorthand broadcast: enabled [ 0.957625] sched_clock: Marking stable (957053837, 408083)->(965233985, -7772065) [ 0.957741] registered taskstats version 1 [ 0.957763] Loading compiled-in X.509 certificates [ 0.985036] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 0.985076] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 0.985123] zswap: loaded using pool lzo/zbud [ 0.985422] Key type .fscrypt registered [ 0.985441] Key type fscrypt-provisioning registered [ 0.985487] AppArmor: AppArmor sha1 policy hashing enabled [ 0.987532] Freeing unused decrypted memory: 2036K [ 0.987883] Freeing unused kernel image (initmem) memory: 2660K [ 1.005753] Write protecting the kernel read-only data: 22528k [ 1.007349] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 1.008666] Freeing unused kernel image (rodata/data gap) memory: 632K [ 1.048993] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.050135] x86/mm: Checking user space page tables [ 1.088197] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.089299] Run /init as init process [ 1.090468] with arguments: [ 1.090480] /init [ 1.090481] with environment: [ 1.090482] HOME=/ [ 1.090482] TERM=linux [ 1.090483] BOOT_IMAGE=/boot/vmlinuz-5.10.0-21-amd64 [ 1.141970] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.144681] pps_core: LinuxPPS API ver. 1 registered [ 1.145831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.147955] PTP clock support registered [ 1.152161] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200925/utaddress-204) [ 1.153377] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.154689] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204) [ 1.155941] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.157194] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRE) (20200925/utaddress-204) [ 1.158479] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204) [ 1.159753] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.161033] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRE) (20200925/utaddress-204) [ 1.161765] ACPI: Power Button [PWRB] [ 1.162345] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204) [ 1.165015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.165074] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.166380] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.169174] ACPI: Power Button [PWRF] [ 1.171745] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 1.173281] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.176681] ACPI: bus type USB registered [ 1.178173] e1000e: Intel(R) PRO/1000 Network Driver [ 1.179538] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.181089] SCSI subsystem initialized [ 1.181196] usbcore: registered new interface driver usbfs [ 1.184009] usbcore: registered new interface driver hub [ 1.185364] usbcore: registered new device driver usb [ 1.189698] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.191544] ehci-pci: EHCI PCI platform driver [ 1.193174] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.194623] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.196993] i2c i2c-0: 4/4 memory slots populated (from DMI) [ 1.203821] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.205211] ehci-pci 0000:00:1a.0: debug port 2 [ 1.206898] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.208606] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 1.208911] libata version 3.00 loaded. [ 1.210327] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 1.210466] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.212021] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 1.213013] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d38000 [ 1.217195] ahci 0000:00:1f.2: version 3.0 [ 1.217350] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.228786] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode [ 1.229735] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.230143] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 1.231567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.234289] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.235657] usb usb1: Product: EHCI Host Controller [ 1.236999] usb usb1: Manufacturer: Linux 5.10.0-21-amd64 ehci_hcd [ 1.238355] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.239899] hub 1-0:1.0: USB hub found [ 1.241240] hub 1-0:1.0: 3 ports detected [ 1.242756] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.244114] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.246515] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 1.247880] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.249371] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.250794] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.252185] usb usb2: Product: xHCI Host Controller [ 1.253553] usb usb2: Manufacturer: Linux 5.10.0-21-amd64 xhci-hcd [ 1.254945] usb usb2: SerialNumber: 0000:00:14.0 [ 1.256491] hub 2-0:1.0: USB hub found [ 1.257913] hub 2-0:1.0: 4 ports detected [ 1.259604] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.259626] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.260986] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.262381] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.263754] ehci-pci 0000:00:1d.0: debug port 2 [ 1.265109] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.267883] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.269222] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.270434] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.270542] usb usb4: Product: xHCI Host Controller [ 1.271847] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d37000 [ 1.273109] usb usb4: Manufacturer: Linux 5.10.0-21-amd64 xhci-hcd [ 1.274432] scsi host0: ahci [ 1.275627] usb usb4: SerialNumber: 0000:00:14.0 [ 1.278305] hub 4-0:1.0: USB hub found [ 1.279519] hub 4-0:1.0: 4 ports detected [ 1.285234] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.285373] scsi host1: ahci [ 1.288006] scsi host2: ahci [ 1.289332] scsi host3: ahci [ 1.290509] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.291822] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.292797] scsi host4: ahci [ 1.292964] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.295241] usb usb3: Product: EHCI Host Controller [ 1.296381] usb usb3: Manufacturer: Linux 5.10.0-21-amd64 ehci_hcd [ 1.297545] usb usb3: SerialNumber: 0000:00:1d.0 [ 1.298794] scsi host5: ahci [ 1.298817] hub 3-0:1.0: USB hub found [ 1.300021] ata1: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36100 irq 27 [ 1.301154] hub 3-0:1.0: 3 ports detected [ 1.302341] ata2: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36180 irq 27 [ 1.304676] ata3: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36200 irq 27 [ 1.305841] ata4: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36280 irq 27 [ 1.306984] ata5: DUMMY [ 1.308124] ata6: DUMMY [ 1.310165] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 1.311310] checking generic (e0000000 6c0000) vs hw (f7800000 400000) [ 1.311311] checking generic (e0000000 6c0000) vs hw (e0000000 10000000) [ 1.311312] fb0: switching to inteldrmfb from EFI VGA [ 1.312569] Console: switching to colour dummy device 80x25 [ 1.312609] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.312869] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory [ 1.313821] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.336119] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0 [ 1.336461] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.336974] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 1.376667] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 6c:0b:84:42:5f:8d [ 1.376671] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.376719] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 1.449729] fbcon: i915drmfb (fb0) is primary device [ 1.497738] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.520889] i915 0000:00:02.0: [drm] *ERROR* uncleared fifo underrun on pipe A [ 1.520890] i915 0000:00:02.0: [drm] *ERROR* CPU pipe A FIFO underrun [ 1.520899] i915 0000:00:02.0: [drm] *ERROR* uncleared pch fifo underrun on pch transcoder A [ 1.520900] i915 0000:00:02.0: [drm] *ERROR* PCH transcoder A FIFO underrun [ 1.537336] Console: switching to colour frame buffer device 210x65 [ 1.558125] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 1.569729] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.624407] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.625167] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.625172] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.625231] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.625557] ata1.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 1.625612] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.626279] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.626284] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.626343] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.626581] ata1.00: configured for UDMA/133 [ 1.626829] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 1.658442] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.658513] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.658827] hub 1-1:1.0: USB hub found [ 1.659025] hub 1-1:1.0: 6 ports detected [ 1.726310] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.726369] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.726719] hub 3-1:1.0: USB hub found [ 1.726896] hub 3-1:1.0: 8 ports detected [ 1.940263] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.944655] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.944660] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.944720] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.949708] tsc: Refined TSC clocksource calibration: 3292.520 MHz [ 1.949718] usb 1-1.4: new full-speed USB device number 3 using ehci-pci [ 1.949760] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns [ 1.949910] clocksource: Switched to clocksource tsc [ 1.952782] ata2.00: ATA-9: HS-SSD-C100 120G, R0817B0, max UDMA/133 [ 1.952834] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.960954] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.960959] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.961018] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.969078] ata2.00: configured for UDMA/133 [ 1.969358] scsi 1:0:0:0: Direct-Access ATA HS-SSD-C100 120G 7B0 PQ: 0 ANSI: 5 [ 2.017702] usb 3-1.6: new high-speed USB device number 3 using ehci-pci [ 2.064426] usb 1-1.4: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01 [ 2.066764] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.131827] usb 3-1.6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70 [ 2.134153] usb 3-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.136442] usb 3-1.6: Product: USB2.0 Hub [ 2.139409] hub 3-1.6:1.0: USB hub found [ 2.142209] hub 3-1.6:1.0: 4 ports detected [ 2.278105] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.284113] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.288293] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 2.288298] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2.290629] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.295000] ata3.00: ATAPI: TSSTcorpDVD-ROM TS-H353C, LE05, max UDMA/100 [ 2.300812] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 2.300816] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2.301981] usb 4-1: New USB device found, idVendor=05e3, idProduct=0748, bcdDevice=12.09 [ 2.303174] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.305500] usb 4-1: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [ 2.309860] ata3.00: configured for UDMA/100 [ 2.310199] usb 4-1: Product: USB Storage [ 2.314024] scsi 2:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353C LE05 PQ: 0 ANSI: 5 [ 2.314836] usb 4-1: Manufacturer: Generic [ 2.314838] usb 4-1: SerialNumber: 000000001209 [ 2.326156] usb-storage 4-1:1.0: USB Mass Storage device detected [ 2.328928] scsi host6: usb-storage 4-1:1.0 [ 2.331303] usbcore: registered new interface driver usb-storage [ 2.437728] usb 3-1.6.2: new full-speed USB device number 4 using ehci-pci [ 2.563462] usb 3-1.6.2: New USB device found, idVendor=0b95, idProduct=6802, bcdDevice= 0.12 [ 2.565830] usb 3-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.568185] usb 3-1.6.2: Product: AX68002 [ 2.570513] usb 3-1.6.2: Manufacturer: ASIX Electronics [ 2.572846] usb 3-1.6.2: SerialNumber: 00000002 [ 2.576142] hub 3-1.6.2:1.0: USB hub found [ 2.579453] hub 3-1.6.2:1.0: 7 ports detected [ 2.669725] usb 3-1.6.3: new high-speed USB device number 5 using ehci-pci [ 2.672380] ata4: SATA link down (SStatus 0 SControl 300) [ 2.677867] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 2.679262] usbcore: registered new interface driver uas [ 2.684118] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.684140] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.685384] sd 0:0:0:0: [sda] Write Protect is off [ 2.686669] sd 1:0:0:0: [sdb] Write Protect is off [ 2.687906] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.687918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.689161] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.690404] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.714970] sdb: sdb1 sdb2 sdb3 [ 2.723158] sda: sda1 sda2 sda3 sda4 [ 2.737762] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.741755] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.775466] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 2.776666] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.783842] usb 3-1.6.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70 [ 2.785001] usb 3-1.6.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.786196] usb 3-1.6.3: Product: USB2.0 Hub [ 2.787900] hub 3-1.6.3:1.0: USB hub found [ 2.789465] hub 3-1.6.3:1.0: 4 ports detected [ 2.837724] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.901741] usb 3-1.6.2.1: new full-speed USB device number 6 using ehci-pci [ 3.047456] usb 3-1.6.2.1: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.02 [ 3.049640] usb 3-1.6.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.051809] usb 3-1.6.2.1: Product: USB NetVista Full Width Keyboard [ 3.053966] usb 3-1.6.2.1: Manufacturer: CHICONY [ 3.067570] hid: raw HID events driver (C) Jiri Kosina [ 3.076108] usbcore: registered new interface driver usbhid [ 3.076109] usbhid: USB HID core driver [ 3.079338] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6.2/3-1.6.2.1/3-1.6.2.1:1.0/0003:04B3:3025.0001/input/input3 [ 3.137914] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:1d.0-1.6.2.1/input0 [ 3.153704] usb 3-1.6.2.2: new full-speed USB device number 7 using ehci-pci [ 3.156273] PM: Image not found (code -22) [ 3.201752] usb 4-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 3.222819] usb 4-2: New USB device found, idVendor=152d, idProduct=0562, bcdDevice= 2.14 [ 3.224004] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.225180] usb 4-2: Product: USB3.0 Super Speed [ 3.226367] usb 4-2: Manufacturer: USB3.0 Super Speed [ 3.227520] usb 4-2: SerialNumber: DD564198838AA [ 3.231088] scsi host7: uas [ 3.232735] scsi 7:0:0:0: Direct-Access USB3.0 Super Speed 0214 PQ: 0 ANSI: 6 [ 3.235452] sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.236648] sd 7:0:0:0: [sdc] 4096-byte physical blocks [ 3.238057] sd 7:0:0:0: [sdc] Write Protect is off [ 3.239237] sd 7:0:0:0: [sdc] Mode Sense: 53 00 00 08 [ 3.239599] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.241038] sd 7:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 3.263484] sdc: sdc1 [ 3.279205] usb 3-1.6.2.2: New USB device found, idVendor=17ef, idProduct=600e, bcdDevice= 1.00 [ 3.280403] usb 3-1.6.2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.281575] usb 3-1.6.2.2: Product: Lenovo Optical Mouse [ 3.310104] input: Lenovo Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6.2/3-1.6.2.2/3-1.6.2.2:1.0/0003:17EF:600E.0002/input/input4 [ 3.312664] hid-generic 0003:17EF:600E.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-0000:00:1d.0-1.6.2.2/input0 [ 3.359496] scsi 6:0:0:0: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 3.362661] scsi 6:0:0:1: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 3.365769] scsi 6:0:0:2: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 3.368915] scsi 6:0:0:3: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 3.411230] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 3.419208] sd 6:0:0:2: [sdf] Attached SCSI removable disk [ 3.422337] sd 6:0:0:3: [sdg] Attached SCSI removable disk [ 3.428199] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 3.634883] sd 7:0:0:0: [sdc] Attached SCSI disk [ 3.644706] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 3.711003] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 3.811386] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 3.837333] systemd[1]: Inserted module 'autofs4' [ 3.910348] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 3.933821] systemd[1]: Detected architecture x86-64. [ 3.938375] systemd[1]: Set hostname to . [ 4.109777] usb 4-3: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [ 4.111135] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 4.130874] usb 4-3: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.09 [ 4.132715] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.134541] usb 4-3: Product: USB to ATA/ATAPI Bridge [ 4.136466] usb 4-3: Manufacturer: JMicron [ 4.138211] usb 4-3: SerialNumber: 0123456789ABCDEF [ 4.142586] scsi host8: uas [ 4.142710] systemd[1]: Queued start job for default target Graphical Interface. [ 4.144356] scsi 8:0:0:0: Direct-Access JMicron Generic 0209 PQ: 0 ANSI: 6 [ 4.149216] sd 8:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 4.151129] sd 8:0:0:0: [sdh] 4096-byte physical blocks [ 4.153403] sd 8:0:0:0: [sdh] Write Protect is off [ 4.155436] sd 8:0:0:0: [sdh] Mode Sense: 53 00 00 08 [ 4.155796] sd 8:0:0:0: [sdh] Disabling FUA [ 4.157793] sd 8:0:0:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.160083] sd 8:0:0:0: [sdh] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 4.194785] systemd[1]: Created slice system-getty.slice. [ 4.196431] systemd[1]: Created slice system-modprobe.slice. [ 4.201509] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 4.204301] sdh: sdh1 [ 4.210197] systemd[1]: Created slice User and Session Slice. [ 4.216272] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.222810] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.229183] systemd[1]: Reached target User and Group Name Lookups. [ 4.231124] sd 8:0:0:0: [sdh] Attached SCSI disk [ 4.238244] systemd[1]: Reached target Remote File Systems. [ 4.240679] systemd[1]: Reached target Slices. [ 4.246707] systemd[1]: Listening on Syslog Socket. [ 4.252392] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.257821] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.263113] systemd[1]: Listening on Journal Audit Socket. [ 4.268191] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.273234] systemd[1]: Listening on Journal Socket. [ 4.278352] systemd[1]: Listening on udev Control Socket. [ 4.282823] systemd[1]: Listening on udev Kernel Socket. [ 4.310239] systemd[1]: Mounting Huge Pages File System... [ 4.312232] systemd[1]: Mounting POSIX Message Queue File System... [ 4.316994] systemd[1]: Mounting Kernel Debug File System... [ 4.320926] systemd[1]: Mounting Kernel Trace File System... [ 4.325043] systemd[1]: Starting Set the console keyboard layout... [ 4.328631] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 4.332274] systemd[1]: Starting Load Kernel Module configfs... [ 4.335745] systemd[1]: Starting Load Kernel Module drm... [ 4.339173] systemd[1]: Starting Load Kernel Module fuse... [ 4.342753] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 4.342780] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 4.346014] systemd[1]: Starting Journal Service... [ 4.348393] fuse: init (API version 7.32) [ 4.348713] systemd[1]: Starting Load Kernel Modules... [ 4.352075] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.354643] systemd[1]: Starting Coldplug All udev Devices... [ 4.358042] systemd[1]: Mounted Huge Pages File System. [ 4.359738] systemd[1]: Mounted POSIX Message Queue File System. [ 4.362602] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro [ 4.364691] systemd[1]: Mounted Kernel Debug File System. [ 4.367132] systemd[1]: Mounted Kernel Trace File System. [ 4.370343] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 4.373239] systemd[1]: modprobe@configfs.service: Succeeded. [ 4.373407] systemd[1]: Finished Load Kernel Module configfs. [ 4.374534] lp: driver loaded but no devices found [ 4.378758] systemd[1]: modprobe@drm.service: Succeeded. [ 4.378928] systemd[1]: Finished Load Kernel Module drm. [ 4.380237] ppdev: user-space parallel port driver [ 4.383985] systemd[1]: modprobe@fuse.service: Succeeded. [ 4.384149] systemd[1]: Finished Load Kernel Module fuse. [ 4.406007] systemd[1]: Finished Remount Root and Kernel File Systems. [ 4.407550] systemd[1]: Finished Load Kernel Modules. [ 4.410854] systemd[1]: Finished Set the console keyboard layout. [ 4.413715] systemd[1]: Mounting FUSE Control File System... [ 4.416339] systemd[1]: Mounting Kernel Configuration File System... [ 4.420345] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.421606] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 4.423593] systemd[1]: Starting Load/Save Random Seed... [ 4.425465] systemd[1]: Starting Apply Kernel Variables... [ 4.427935] systemd[1]: Starting Create System Users... [ 4.434788] systemd[1]: Started Journal Service. [ 4.449031] systemd-journald[275]: Received client request to flush runtime journal. [ 4.815753] EDAC ie31200: No ECC support [ 4.816850] EDAC ie31200: No ECC support [ 4.870266] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.871492] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.872572] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 4.873792] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 4.874853] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 4.875885] sd 6:0:0:1: Attached scsi generic sg5 type 0 [ 4.876916] sd 6:0:0:2: Attached scsi generic sg6 type 0 [ 4.878031] sd 6:0:0:3: Attached scsi generic sg7 type 0 [ 4.879064] sd 8:0:0:0: Attached scsi generic sg8 type 0 [ 4.890650] at24 0-0050: supply vcc not found, using dummy regulator [ 4.892212] at24 0-0050: 256 byte spd EEPROM, read-only [ 4.893210] at24 0-0051: supply vcc not found, using dummy regulator [ 4.895188] at24 0-0051: 256 byte spd EEPROM, read-only [ 4.896230] at24 0-0052: supply vcc not found, using dummy regulator [ 4.897870] at24 0-0052: 256 byte spd EEPROM, read-only [ 4.898887] at24 0-0053: supply vcc not found, using dummy regulator [ 4.898907] iTCO_vendor_support: vendor-support=0 [ 4.900899] at24 0-0053: 256 byte spd EEPROM, read-only [ 4.906860] tpm_tis 00:07: 1.2 TPM (device-id 0xFE, rev-id 71) [ 4.959042] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.960703] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 4.962206] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.005847] Adding 7811068k swap on /dev/sdb1. Priority:-2 extents:1 across:7811068k SSFS [ 5.024911] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.026021] usb 4-4: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [ 5.027211] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 5.031231] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 5.032816] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 5.034118] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.046563] usb 4-4: New USB device found, idVendor=13fd, idProduct=3920, bcdDevice= 2.05 [ 5.047637] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.048682] usb 4-4: Product: External [ 5.049787] usb 4-4: Manufacturer: Generic [ 5.050844] usb 4-4: SerialNumber: 533334524A39454639313733 [ 5.052888] usb-storage 4-4:1.0: USB Mass Storage device detected [ 5.055730] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 5.057023] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 5.058807] scsi host9: usb-storage 4-4:1.0 [ 5.085632] pstore: Using crash dump compression: deflate [ 5.086912] pstore: Registered efi as persistent store backend [ 5.095104] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 5.096190] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 5.097258] RAPL PMU: hw unit of domain package 2^-16 Joules [ 5.098328] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 5.103551] Intel(R) Wireless WiFi driver for Linux [ 5.104745] cryptd: max_cpu_qlen set to 1000 [ 5.104812] iwlwifi 0000:02:00.0: enabling device (0100 -> 0102) [ 5.120143] AVX version of gcm_enc/dec engaged. [ 5.120144] AES CTR mode by8 optimization enabled [ 5.121962] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-cc-a0-59.ucode [ 5.121972] iwlwifi 0000:02:00.0: api flags index 2 larger than supported by driver [ 5.121984] iwlwifi 0000:02:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.22 [ 5.122281] iwlwifi 0000:02:00.0: loaded firmware version 59.601f3a66.0 cc-a0-59.ucode op_mode iwlmvm [ 5.122300] iwlwifi 0000:02:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2) [ 5.122300] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 5.269903] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 5.296710] audit: type=1400 audit(1679961934.844:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=611 comm="apparmor_parser" [ 5.297988] audit: type=1400 audit(1679961934.844:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=610 comm="apparmor_parser" [ 5.299237] audit: type=1400 audit(1679961934.844:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=610 comm="apparmor_parser" [ 5.308259] audit: type=1400 audit(1679961934.856:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=618 comm="apparmor_parser" [ 5.309511] audit: type=1400 audit(1679961934.856:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=613 comm="apparmor_parser" [ 5.316960] iwlwifi 0000:02:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [ 5.317685] audit: type=1400 audit(1679961934.864:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=641 comm="apparmor_parser" [ 5.320853] audit: type=1400 audit(1679961934.868:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=619 comm="apparmor_parser" [ 5.322155] audit: type=1400 audit(1679961934.868:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=619 comm="apparmor_parser" [ 5.323438] audit: type=1400 audit(1679961934.868:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=619 comm="apparmor_parser" [ 5.330818] audit: type=1400 audit(1679961934.880:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_i2p" pid=644 comm="apparmor_parser" [ 5.395164] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 5.396693] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.423520] Bluetooth: Core ver 2.22 [ 5.425063] NET: Registered protocol family 31 [ 5.426399] Bluetooth: HCI device and connection manager initialized [ 5.427736] Bluetooth: HCI socket layer initialized [ 5.429025] Bluetooth: L2CAP socket layer initialized [ 5.430364] Bluetooth: SCO socket layer initialized [ 5.435314] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 5.436637] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 5.437950] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.439296] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 5.440584] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 5.441863] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 5.443127] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 5.444379] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 5.451987] usbcore: registered new interface driver btusb [ 5.453998] Bluetooth: hci0: Firmware revision 0.3 build 15 week 45 2022 [ 5.463904] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 5.465198] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 5.466474] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.467751] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.470467] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.472513] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.506272] iwlwifi 0000:02:00.0: base HW address: e0:d4:64:33:10:5d [ 5.520137] thermal thermal_zone3: failed to read out thermal zone (-61) [ 5.524232] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 5.566134] intel_rapl_common: Found RAPL domain package [ 5.567415] intel_rapl_common: Found RAPL domain core [ 5.568674] intel_rapl_common: Found RAPL domain uncore [ 5.569933] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 6.002492] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.002492] Bluetooth: BNEP filters: protocol multicast [ 6.002496] Bluetooth: BNEP socket layer initialized [ 6.015301] NET: Registered protocol family 38 [ 6.078645] scsi 9:0:0:0: Direct-Access Generic External 0205 PQ: 0 ANSI: 6 [ 6.079929] sd 9:0:0:0: Attached scsi generic sg9 type 0 [ 6.080094] sd 9:0:0:0: [sdi] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 6.080611] sd 9:0:0:0: [sdi] Write Protect is off [ 6.082994] sd 9:0:0:0: [sdi] Mode Sense: 1f 00 10 08 [ 6.083528] sd 9:0:0:0: [sdi] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 6.099082] Bluetooth: RFCOMM TTY layer initialized [ 6.099955] Bluetooth: RFCOMM socket layer initialized [ 6.100816] Bluetooth: RFCOMM ver 1.11 [ 6.103271] sdi: sdi1 [ 6.129972] sd 9:0:0:0: [sdi] Attached SCSI disk [ 6.916836] vboxdrv: loading out-of-tree module taints kernel. [ 6.917096] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 6.924519] vboxdrv: Found 4 processor cores/threads [ 6.942022] vboxdrv: TSC mode is Invariant, tentative frequency 3292569566 Hz [ 6.942024] vboxdrv: Successfully loaded version 7.0.0 r153978 (interface 0x00330003) [ 7.150356] VBoxNetFlt: Successfully started. [ 7.153256] VBoxNetAdp: Successfully started. [ 8.015756] e1000e 0000:00:19.0 eno1: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 8.015761] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO [ 8.015802] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 8.033359] 8021q: 802.1Q VLAN Support v1.8 [ 8.768211] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 8.769906] Bridge firewalling registered [ 8.882975] Initializing XFRM netlink socket