[ 19.119] X.Org X Server 1.21.1.18 X Protocol Version 11, Revision 0 [ 19.120] Current Operating System: FreeBSD cx 15.0-STABLE FreeBSD 15.0-STABLE stable/15-n281152-0fb0ba51d8bc GENERIC amd64 [ 19.120] [ 19.120] Current version of pixman: 0.46.2 [ 19.120] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 19.120] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 19.120] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 18 10:37:43 2025 [ 19.122] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d" [ 19.123] (==) No Layout section. Using the first Screen section. [ 19.123] (==) No screen section available. Using defaults. [ 19.123] (**) |-->Screen "Default Screen Section" (0) [ 19.124] (**) | |-->Monitor "" [ 19.125] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 19.125] (**) Allowing byte-swapped clients [ 19.126] (==) Automatically adding devices [ 19.126] (==) Automatically enabling devices [ 19.126] (==) Automatically adding GPU devices [ 19.126] (==) Automatically binding GPU devices [ 19.126] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 19.131] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/, catalogue:/usr/local/etc/X11/fontpath.d [ 19.131] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 19.131] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 19.131] (II) Module ABI versions: [ 19.131] X.Org ANSI C Emulation: 0.4 [ 19.131] X.Org Video Driver: 25.2 [ 19.131] X.Org XInput driver : 24.4 [ 19.131] X.Org Server Extension : 10.0 [ 19.139] (II) xfree86: Adding drm device (/dev/dri/card0) [ 19.139] (II) Platform probe for /dev/dri/card0 [ 19.154] (--) PCI:*(0@0:2:0) 8086:22b1:17aa:3905 rev 53, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x00001000/64, BIOS @ 0x????????/65536 [ 19.154] (II) LoadModule: "glx" [ 19.155] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 19.167] (II) Module glx: vendor="X.Org Foundation" [ 19.167] compiled for 1.21.1.18, module version = 1.0.0 [ 19.167] ABI class: X.Org Server Extension, version 10.0 [ 19.168] (==) Matched intel as autoconfigured driver 0 [ 19.168] (==) Matched modesetting as autoconfigured driver 1 [ 19.168] (==) Matched scfb as autoconfigured driver 2 [ 19.168] (==) Matched vesa as autoconfigured driver 3 [ 19.168] (==) Assigned the driver to the xf86ConfigLayout [ 19.168] (II) LoadModule: "intel" [ 19.168] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 19.172] (II) Module intel: vendor="X.Org Foundation" [ 19.172] compiled for 1.21.1.18, module version = 2.99.917 [ 19.172] Module class: X.Org Video Driver [ 19.172] ABI class: X.Org Video Driver, version 25.2 [ 19.173] (II) LoadModule: "modesetting" [ 19.173] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so [ 19.178] (II) Module modesetting: vendor="X.Org Foundation" [ 19.178] compiled for 1.21.1.18, module version = 1.21.1 [ 19.178] Module class: X.Org Video Driver [ 19.178] ABI class: X.Org Video Driver, version 25.2 [ 19.178] (II) LoadModule: "scfb" [ 19.179] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so [ 19.179] (II) Module scfb: vendor="X.Org Foundation" [ 19.179] compiled for 1.21.1.18, module version = 0.0.5 [ 19.179] ABI class: X.Org Video Driver, version 25.2 [ 19.179] (II) LoadModule: "vesa" [ 19.179] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 19.180] (II) Module vesa: vendor="X.Org Foundation" [ 19.180] compiled for 1.21.1.18, module version = 2.5.0 [ 19.180] Module class: X.Org Video Driver [ 19.180] ABI class: X.Org Video Driver, version 25.2 [ 19.180] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 19.182] (II) intel: Driver for Intel(R) HD Graphics [ 19.182] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 19.182] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 19.182] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 19.182] (II) scfb: driver for wsdisplay framebuffer: scfb [ 19.182] (II) VESA: driver for VESA chipsets: vesa [ 19.182] (--) Using syscons driver with X support (version 2.0) [ 19.182] (++) using VT number 9 [ 19.194] (WW) Falling back to old probe method for modesetting [ 19.194] (WW) Falling back to old probe method for scfb [ 19.194] scfb trace: probe start [ 19.194] scfb trace: probe done [ 19.194] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 19.194] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 19.195] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 19.195] (==) intel(0): RGB weight 888 [ 19.195] (==) intel(0): Default visual is TrueColor [ 19.195] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics [ 19.195] (**) intel(0): Relaxed fencing enabled [ 19.195] (**) intel(0): Wait on SwapBuffers? enabled [ 19.195] (**) intel(0): Triple buffering? enabled [ 19.195] (**) intel(0): Framebuffer tiled [ 19.195] (**) intel(0): Pixmaps tiled [ 19.195] (**) intel(0): 3D buffers tiled [ 19.195] (**) intel(0): SwapBuffers wait enabled [ 19.195] (==) intel(0): video overlay key set to 0x101fe [ 19.201] (II) intel(0): Output eDP-1 has no monitor section [ 19.201] (II) intel(0): Output DP-1 has no monitor section [ 19.203] (II) intel(0): Output HDMI-1 has no monitor section [ 19.383] (II) intel(0): Output DP-2 has no monitor section [ 19.385] (II) intel(0): Output HDMI-2 has no monitor section [ 19.389] (II) intel(0): EDID for output eDP-1 [ 19.389] (II) intel(0): Manufacturer: BOE Model: 698 Serial#: 0 [ 19.389] (II) intel(0): Year: 2015 Week: 1 [ 19.389] (II) intel(0): EDID Version: 1.4 [ 19.389] (II) intel(0): Digital Display Input [ 19.389] (II) intel(0): 6 bits per channel [ 19.389] (II) intel(0): Digital interface is DisplayPort [ 19.389] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17 [ 19.389] (II) intel(0): Gamma: 2.20 [ 19.389] (II) intel(0): No DPMS capabilities specified [ 19.389] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 19.389] (II) intel(0): First detailed timing is preferred mode [ 19.389] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 19.389] (II) intel(0): redX: 0.590 redY: 0.350 greenX: 0.329 greenY: 0.555 [ 19.389] (II) intel(0): blueX: 0.152 blueY: 0.118 whiteX: 0.312 whiteY: 0.328 [ 19.389] (II) intel(0): Manufacturer's mask: 0 [ 19.389] (II) intel(0): Supported detailed timing: [ 19.389] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm [ 19.390] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0 [ 19.390] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0 [ 19.390] (II) intel(0): BOE CQ [ 19.390] (II) intel(0): NT140WHM-N31 [ 19.390] (II) intel(0): EDID (in hex): [ 19.390] (II) intel(0): 00ffffffffffff0009e5980600000000 [ 19.390] (II) intel(0): 01190104951f11780224109759548e27 [ 19.390] (II) intel(0): 1e505400000001010101010101010101 [ 19.390] (II) intel(0): 0101010101013e1c56a0500016303020 [ 19.390] (II) intel(0): 360035ad1000001a0000000000000000 [ 19.390] (II) intel(0): 00000000000000000000000000fe0042 [ 19.390] (II) intel(0): 4f452043510a202020202020000000fe [ 19.390] (II) intel(0): 004e5431343057484d2d4e33310a0049 [ 19.390] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 19.390] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.390] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 19.391] (II) intel(0): Not using default mode "1024x576" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "1024x576" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "1280x720" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "1280x720" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 19.392] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 19.392] (II) intel(0): Printing probed modes for output eDP-1 [ 19.392] (II) intel(0): Modeline "1366x768"x60.0 72.30 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz eP) [ 19.392] (II) intel(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d) [ 19.392] (II) intel(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d) [ 19.392] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 19.392] (II) intel(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d) [ 19.392] (II) intel(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d) [ 19.392] (II) intel(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d) [ 19.392] (II) intel(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d) [ 19.392] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 19.392] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 19.392] (II) intel(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d) [ 19.392] (II) intel(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d) [ 19.392] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 19.393] (II) intel(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d) [ 19.393] (II) intel(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d) [ 19.393] (II) intel(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d) [ 19.393] (II) intel(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d) [ 19.393] (II) intel(0): EDID for output DP-1 [ 19.395] (II) intel(0): EDID for output HDMI-1 [ 19.558] (II) intel(0): EDID for output DP-2 [ 19.560] (II) intel(0): EDID for output HDMI-2 [ 19.560] (II) intel(0): Output eDP-1 connected [ 19.560] (II) intel(0): Output DP-1 disconnected [ 19.560] (II) intel(0): Output HDMI-1 disconnected [ 19.560] (II) intel(0): Output DP-2 disconnected [ 19.560] (II) intel(0): Output HDMI-2 disconnected [ 19.560] (II) intel(0): Using exact sizes for initial modes [ 19.560] (II) intel(0): Output eDP-1 using initial mode 1366x768 +0+0 [ 19.560] (II) intel(0): Kernel page flipping support detected, enabling [ 19.560] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 19.560] (==) intel(0): DPI set to (96, 96) [ 19.560] (II) Loading sub module "fb" [ 19.560] (II) LoadModule: "fb" [ 19.560] (II) Module "fb" already built-in [ 19.560] (II) Loading sub module "dri2" [ 19.560] (II) LoadModule: "dri2" [ 19.560] (II) Module "dri2" already built-in [ 19.560] (II) UnloadModule: "modesetting" [ 19.560] (II) Unloading modesetting [ 19.561] (II) UnloadModule: "scfb" [ 19.561] (II) Unloading scfb [ 19.561] (II) UnloadModule: "vesa" [ 19.561] (II) Unloading vesa [ 19.561] (II) intel(0): Allocated new frame buffer 1366x768 stride 5632, tiled [ 19.562] (II) UXA(0): Driver registered support for the following operations: [ 19.562] (II) solid [ 19.562] (II) copy [ 19.562] (II) put_image [ 19.562] (II) get_image [ 19.563] (WW) intel(0): cannot enable DRI2 whilst forcing software fallbacks [ 19.563] (==) intel(0): Backing store enabled [ 19.563] (==) intel(0): Silken mouse enabled [ 19.563] (II) intel(0): Initializing HW Cursor [ 19.564] (==) intel(0): DPMS enabled [ 19.564] (==) intel(0): Intel XvMC decoder enabled [ 19.564] (WW) intel(0): Disabling Xv because no adaptors could be initialized. [ 19.564] (II) intel(0): DRI2: Failed [ 19.564] (II) intel(0): DRI3: Disabled [ 19.564] (==) intel(0): hotplug detection: "enabled" [ 19.604] (II) Initializing extension Generic Event Extension [ 19.604] (II) Initializing extension SHAPE [ 19.605] (II) Initializing extension MIT-SHM [ 19.605] (II) Initializing extension XInputExtension [ 19.606] (II) Initializing extension XTEST [ 19.606] (II) Initializing extension BIG-REQUESTS [ 19.607] (II) Initializing extension SYNC [ 19.607] (II) Initializing extension XKEYBOARD [ 19.608] (II) Initializing extension XC-MISC [ 19.608] (II) Initializing extension SECURITY [ 19.609] (II) Initializing extension XFIXES [ 19.609] (II) Initializing extension RENDER [ 19.609] (II) Initializing extension RANDR [ 19.610] (II) Initializing extension COMPOSITE [ 19.611] (II) Initializing extension DAMAGE [ 19.611] (II) Initializing extension MIT-SCREEN-SAVER [ 19.611] (II) Initializing extension DOUBLE-BUFFER [ 19.612] (II) Initializing extension RECORD [ 19.612] (II) Initializing extension DPMS [ 19.613] (II) Initializing extension Present [ 19.613] (II) Initializing extension DRI3 [ 19.613] (II) Initializing extension X-Resource [ 19.613] (II) Initializing extension XVideo [ 19.614] (II) Initializing extension XVideo-MotionCompensation [ 19.614] (II) Initializing extension GLX [ 19.614] (II) AIGLX: Screen 0 is not DRI2 capable [ 20.018] (II) IGLX: Loaded and initialized swrast [ 20.018] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 20.019] (II) Initializing extension XFree86-VidModeExtension [ 20.019] (II) Initializing extension XFree86-DGA [ 20.019] (II) Initializing extension XFree86-DRI [ 20.019] (II) Initializing extension DRI2 [ 20.020] (II) intel(0): Setting screen physical size to 361 x 203 [ 20.224] (II) config/udev: Adding input device System keyboard multiplexer (/dev/input/event0) [ 20.224] (**) System keyboard multiplexer: Applying InputClass "Evdev keyboard" [ 20.224] (**) System keyboard multiplexer: Applying InputClass "libinput keyboard catchall" [ 20.224] (II) LoadModule: "libinput" [ 20.225] (II) Loading /usr/local/lib/xorg/modules/input/libinput_drv.so [ 20.245] (II) Module libinput: vendor="X.Org Foundation" [ 20.245] compiled for 1.21.1.18, module version = 1.3.0 [ 20.245] Module class: X.Org XInput Driver [ 20.245] ABI class: X.Org XInput driver, version 24.4 [ 20.246] (II) Using input driver 'libinput' for 'System keyboard multiplexer' [ 20.246] (**) System keyboard multiplexer: always reports core events [ 20.246] (**) Option "Device" "/dev/input/event0" [ 20.265] (II) event0 - System keyboard multiplexer: is tagged by udev as: Keyboard [ 20.267] (II) event0 - System keyboard multiplexer: device is a keyboard [ 20.272] (II) event0 - System keyboard multiplexer: device removed [ 20.272] (**) Option "config_info" "udev:/dev/input/event0" [ 20.272] (II) XINPUT: Adding extended input device "System keyboard multiplexer" (type: KEYBOARD, id 6) [ 20.272] (**) Option "xkb_rules" "evdev" [ 20.350] (II) event0 - System keyboard multiplexer: is tagged by udev as: Keyboard [ 20.351] (II) event0 - System keyboard multiplexer: device is a keyboard [ 20.356] (II) config/udev: Adding input device System mouse (/dev/input/event1) [ 20.356] (**) System mouse: Applying InputClass "libinput pointer catchall" [ 20.356] (II) Using input driver 'libinput' for 'System mouse' [ 20.356] (**) System mouse: always reports core events [ 20.357] (**) Option "Device" "/dev/input/event1" [ 20.361] (II) event1 - System mouse: is tagged by udev as: Mouse [ 20.364] (II) event1 - System mouse: device is a pointer [ 20.367] (II) event1 - System mouse: device removed [ 20.367] (II) libinput: System mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20.367] (II) libinput: System mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20.368] (II) libinput: System mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20.368] (**) Option "config_info" "udev:/dev/input/event1" [ 20.368] (II) XINPUT: Adding extended input device "System mouse" (type: MOUSE, id 7) [ 20.368] (**) Option "AccelerationScheme" "none" [ 20.369] (**) System mouse: (accel) selected scheme none/0 [ 20.369] (**) System mouse: (accel) acceleration factor: 2.000 [ 20.369] (**) System mouse: (accel) acceleration threshold: 4 [ 20.373] (II) event1 - System mouse: is tagged by udev as: Mouse [ 20.376] (II) event1 - System mouse: device is a pointer [ 20.380] (II) config/udev: Adding input device Control Method Lid Switch (/dev/input/event2) [ 20.380] (II) No input driver specified, ignoring this device. [ 20.380] (II) This device may have been added with another device file. [ 20.380] (II) config/udev: Adding input device AT keyboard (/dev/input/event3) [ 20.380] (**) AT keyboard: Applying InputClass "Evdev keyboard" [ 20.380] (**) AT keyboard: Applying InputClass "libinput keyboard catchall" [ 20.380] (II) Using input driver 'libinput' for 'AT keyboard' [ 20.380] (**) AT keyboard: always reports core events [ 20.380] (**) Option "Device" "/dev/input/event3" [ 20.385] (II) event3 - AT keyboard: is tagged by udev as: Keyboard [ 20.386] (II) event3 - AT keyboard: device is a keyboard [ 20.394] (II) event3 - AT keyboard: device removed [ 20.394] (**) Option "config_info" "udev:/dev/input/event3" [ 20.394] (II) XINPUT: Adding extended input device "AT keyboard" (type: KEYBOARD, id 8) [ 20.394] (**) Option "xkb_rules" "evdev" [ 20.399] (II) event3 - AT keyboard: is tagged by udev as: Keyboard [ 20.400] (II) event3 - AT keyboard: device is a keyboard [ 20.408] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event4) [ 20.408] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput pointer catchall" [ 20.408] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall" [ 20.408] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad' [ 20.408] (**) ETPS/2 Elantech Touchpad: always reports core events [ 20.408] (**) Option "Device" "/dev/input/event4" [ 20.430] (II) event4 - ETPS/2 Elantech Touchpad: is tagged by udev as: Mouse Touchpad [ 20.460] (II) event4 - ETPS/2 Elantech Touchpad: device is a touchpad [ 20.462] (II) event4 - ETPS/2 Elantech Touchpad: device removed [ 20.498] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20.498] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20.498] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20.505] (**) Option "config_info" "udev:/dev/input/event4" [ 20.505] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 9) [ 20.518] (**) Option "AccelerationScheme" "none" [ 20.518] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0 [ 20.518] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 [ 20.518] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 [ 20.539] (II) event4 - ETPS/2 Elantech Touchpad: is tagged by udev as: Mouse Touchpad [ 20.569] (II) event4 - ETPS/2 Elantech Touchpad: device is a touchpad [ 20.574] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event5) [ 20.574] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall" [ 20.574] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse' [ 20.574] (**) Logitech USB Receiver Mouse: always reports core events [ 20.574] (**) Option "Device" "/dev/input/event5" [ 20.579] (II) event5 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse [ 20.582] (II) event5 - Logitech USB Receiver Mouse: device is a pointer [ 20.587] (II) event5 - Logitech USB Receiver Mouse: device removed [ 20.587] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20.587] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20.588] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20.588] (**) Option "config_info" "udev:/dev/input/event5" [ 20.588] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 10) [ 20.588] (**) Option "AccelerationScheme" "none" [ 20.588] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0 [ 20.588] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000 [ 20.588] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4 [ 20.594] (II) event5 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse [ 20.597] (II) event5 - Logitech USB Receiver Mouse: device is a pointer [ 20.601] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event6) [ 20.602] (**) Logitech USB Receiver Consumer Control: Applying InputClass "Evdev keyboard" [ 20.602] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 20.602] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control' [ 20.602] (**) Logitech USB Receiver Consumer Control: always reports core events [ 20.602] (**) Option "Device" "/dev/input/event6" [ 20.607] (II) event6 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard [ 20.609] (II) event6 - Logitech USB Receiver Consumer Control: device is a keyboard [ 20.613] (II) event6 - Logitech USB Receiver Consumer Control: device removed [ 20.614] (**) Option "config_info" "udev:/dev/input/event6" [ 20.614] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 11) [ 20.614] (**) Option "xkb_rules" "evdev" [ 20.620] (II) event6 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard [ 20.621] (II) event6 - Logitech USB Receiver Consumer Control: device is a keyboard [ 34.928] (II) intel(0): EDID vendor "BOE", prod id 1688 [ 34.928] (II) intel(0): Printing DDC gathered Modelines: [ 34.928] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz eP) [ 35.099] (II) intel(0): EDID vendor "BOE", prod id 1688 [ 35.099] (II) intel(0): Printing DDC gathered Modelines: [ 35.099] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz eP) [ 165.463] (II) event4 - ETPS/2 Elantech Touchpad: SYN_DROPPED event - some input events have been lost. [ 373.109] (EE) event4 - ETPS/2 Elantech Touchpad: client bug: event processing lagging behind by 24ms, your system is too slow [ 432.347] (EE) event4 - ETPS/2 Elantech Touchpad: client bug: event processing lagging behind by 28ms, your system is too slow [ 54652.032] (EE) event4 - ETPS/2 Elantech Touchpad: client bug: event processing lagging behind by 26ms, your system is too slow [ 54655.723] (EE) event4 - ETPS/2 Elantech Touchpad: client bug: event processing lagging behind by 29ms, your system is too slow [ 54697.154] (EE) event4 - ETPS/2 Elantech Touchpad: client bug: event processing lagging behind by 73ms, your system is too slow [ 54735.403] (EE) event4 - ETPS/2 Elantech Touchpad: client bug: event processing lagging behind by 41ms, your system is too slow