[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.12.25+rpt-rpi-v8 (serge@raspberrypi.com) (aarch64-linux-gnu-gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.12.25-1+rpt1 (2025-04-30) [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.1 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000000e800000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x000000000e800000..0x000000002e7fffff (524288 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x000000003ef667e0..0x000000003ef66993 (0 KiB) nomap non-reusable nvram@0 [ 0.000000] OF: reserved mem: 0x000000003ef663a0..0x000000003ef6679f (1 KiB) nomap non-reusable nvram@1 [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7fbdb840-0x7fbde53f] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges [ 0.000000] percpu: Embedded 33 pages/cpu s95064 r8192 d31912 u135168 [ 0.000000] pcpu-alloc: s95064 r8192 d31912 u135168 alloc=33*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:A6:4A:BF vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=de2270b9-02 rootfstype=ext4 fsck.repair=yes rootwait [ 0.000000] cgroup: Disabling memory control group subsystem [ 0.000000] mempolicy: NUMA default policy overridden to 'interleave:0' [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 504832 [ 0.000000] Policy zone: DMA32 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 44909 entries in 176 pages [ 0.000000] ftrace: allocated 176 pages with 3 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000169] Console: colour dummy device 80x25 [ 0.000179] printk: legacy console [tty1] enabled [ 0.000486] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000503] pid_max: default: 32768 minimum: 301 [ 0.000541] LSM: initializing lsm=capability [ 0.000661] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000685] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.016008] rcu: Hierarchical SRCU implementation. [ 0.016031] rcu: Max phase no-delay instances is 1000. [ 0.016196] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.020661] EFI services will not be available. [ 0.024021] smp: Bringing up secondary CPUs ... [ 0.032108] Detected PIPT I-cache on CPU1 [ 0.032181] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.036232] Detected PIPT I-cache on CPU2 [ 0.036274] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.044239] Detected PIPT I-cache on CPU3 [ 0.044281] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.044338] smp: Brought up 1 node, 4 CPUs [ 0.044374] SMP: Total of 4 processors activated. [ 0.044380] CPU: All CPU(s) started at EL2 [ 0.044395] CPU features: detected: 32-bit EL0 Support [ 0.044402] CPU features: detected: 32-bit EL1 Support [ 0.044409] CPU features: detected: CRC32 instructions [ 0.044447] alternatives: applying system-wide alternatives [ 0.045393] Memory: 1348480K/2019328K available (13952K kernel code, 2252K rwdata, 4684K rodata, 5184K init, 577K bss, 141352K reserved, 524288K cma-reserved) [ 0.045761] devtmpfs: initialized [ 0.050500] Enabled cp15_barrier support [ 0.050538] Enabled setend support [ 0.050633] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.050654] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.059354] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.059392] 0 pages in range for non-PLT usage [ 0.059395] 517568 pages in range for PLT usage [ 0.059582] pinctrl core: initialized pinctrl subsystem [ 0.059942] DMI not present or invalid. [ 0.061589] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.062309] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.062421] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.062597] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.062635] audit: initializing netlink subsys (disabled) [ 0.062794] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1 [ 0.063054] thermal_sys: Registered thermal governor 'step_wise' [ 0.063080] cpuidle: using governor menu [ 0.063183] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.063250] ASID allocator initialised with 32768 entries [ 0.063718] Serial: AMBA PL011 UART driver [ 0.066639] /soc/interrupt-controller@40041000: Fixed dependency cycle(s) with /soc/interrupt-controller@40041000 [ 0.067104] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.076237] raspberrypi-firmware soc:firmware: Attached to firmware from 2025-04-30T13:33:39, variant start [ 0.080241] raspberrypi-firmware soc:firmware: Firmware hash is 5560078dcc8591a00f57b9068d13e5544aeef3aa [ 0.085830] /scb/pcie@7d500000: Fixed dependency cycle(s) with /scb/pcie@7d500000 [ 0.085970] /scb/pcie@7d500000: Fixed dependency cycle(s) with /scb/pcie@7d500000 [ 0.089102] bcm2835-dma fe007000.dma-controller: DMA legacy API manager, dmachans=0x1 [ 0.089899] iommu: Default domain type: Translated [ 0.089910] iommu: DMA domain TLB invalidation policy: strict mode [ 0.090821] SCSI subsystem initialized [ 0.090913] usbcore: registered new interface driver usbfs [ 0.090938] usbcore: registered new interface driver hub [ 0.090961] usbcore: registered new device driver usb [ 0.091165] pps_core: LinuxPPS API ver. 1 registered [ 0.091174] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.091187] PTP clock support registered [ 0.091830] vgaarb: loaded [ 0.092104] clocksource: Switched to clocksource arch_sys_counter [ 0.092395] VFS: Disk quotas dquot_6.6.0 [ 0.092416] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.095785] NET: Registered PF_INET protocol family [ 0.095964] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.097184] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.097218] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.097231] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.097293] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.097786] TCP: Hash tables configured (established 16384 bind 16384) [ 0.097955] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) [ 0.098035] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.098058] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.098164] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.098585] RPC: Registered named UNIX socket transport module. [ 0.098598] RPC: Registered udp transport module. [ 0.098604] RPC: Registered tcp transport module. [ 0.098610] RPC: Registered tcp-with-tls transport module. [ 0.098616] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.098631] PCI: CLS 0 bytes, default 64 [ 0.098871] Trying to unpack rootfs image as initramfs... [ 0.107474] kvm [1]: nv: 554 coarse grained trap handlers [ 0.107830] kvm [1]: IPA Size Limit: 44 bits [ 0.108658] kvm [1]: vgic interrupt IRQ9 [ 0.108745] kvm [1]: Hyp nVHE mode initialized successfully [ 0.262942] Freeing initrd memory: 7476K [ 0.565172] Initialise system trusted keyrings [ 0.565408] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 0.565826] NFS: Registering the id_resolver key type [ 0.565845] Key type id_resolver registered [ 0.565852] Key type id_legacy registered [ 0.565867] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.565876] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.566254] Key type asymmetric registered [ 0.566265] Asymmetric key parser 'x509' registered [ 0.566303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.566413] io scheduler mq-deadline registered [ 0.566424] io scheduler kyber registered [ 0.566446] io scheduler bfq registered [ 0.566969] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 23) [ 0.568583] pinctrl-bcm2835 fe200000.gpio: GPIO_OUT persistence: yes [ 0.576178] ledtrig-cpu: registered to indicate activity on CPUs [ 0.577910] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.577961] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 0.577993] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 0.578022] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000 [ 0.579397] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.579441] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.579454] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 0.579522] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 PCIe Root Port [ 0.579546] pci 0000:00:00.0: PCI bridge to [bus 00] [ 0.579558] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 0.579571] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.579621] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.581372] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.581512] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator [ 0.581601] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator [ 0.581632] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator [ 0.780116] brcm-pcie fd500000.pcie: clkreq-mode set to default [ 0.782194] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 0.804027] pci 0000:01:00.0: [1b21:1064] type 00 class 0x010601 PCIe Endpoint [ 0.804058] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff] [ 0.804114] pci 0000:01:00.0: BAR 5 [mem 0x00000000-0x00001fff] [ 0.804132] pci 0000:01:00.0: ROM [mem 0x00000000-0x0007ffff pref] [ 0.804151] pci 0000:01:00.0: enabling Extended Tags [ 0.804247] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.804298] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 7.876 Gb/s with 8.0 GT/s PCIe x1 link) [ 0.812143] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.812170] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]: assigned [ 0.812183] pci 0000:01:00.0: ROM [mem 0x600000000-0x60007ffff pref]: assigned [ 0.812194] pci 0000:01:00.0: BAR 0 [mem 0x600080000-0x600081fff]: assigned [ 0.812216] pci 0000:01:00.0: BAR 5 [mem 0x600082000-0x600083fff]: assigned [ 0.812228] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.812238] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.812249] pci_bus 0000:00: resource 4 [mem 0x600000000-0x63fffffff] [ 0.812258] pci_bus 0000:01: resource 1 [mem 0x600000000-0x6000fffff] [ 0.812407] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 0.812491] pcieport 0000:00:00.0: PME: Signaling with IRQ 27 [ 0.812675] pcieport 0000:00:00.0: AER: enabled with IRQ 27 [ 0.813103] simple-framebuffer 3e3cf000.framebuffer: framebuffer at 0x3e3cf000, 0x7f8000 bytes [ 0.813116] simple-framebuffer 3e3cf000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680 [ 0.816841] Console: switching to colour frame buffer device 240x67 [ 0.820117] simple-framebuffer 3e3cf000.framebuffer: fb0: simplefb registered! [ 0.824539] iproc-rng200 fe104000.rng: hwrng registered [ 0.824670] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.829504] brd: module loaded [ 0.832389] loop: module loaded [ 0.832750] Loading iSCSI transport class v2.0-870. [ 0.834854] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.032145] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.032753] usbcore: registered new interface driver lan78xx [ 1.032810] usbcore: registered new interface driver smsc95xx [ 1.058168] xhci-hcd fe9c0000.xhci: xHCI Host Controller [ 1.058207] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 1 [ 1.058346] xhci-hcd fe9c0000.xhci: USB3 root hub has no ports [ 1.058372] xhci-hcd fe9c0000.xhci: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000000010 [ 1.058431] xhci-hcd fe9c0000.xhci: irq 30, io mem 0xfe9c0000 [ 1.058617] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.058651] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.058679] usb usb1: Product: xHCI Host Controller [ 1.058700] usb usb1: Manufacturer: Linux 6.12.25+rpt-rpi-v8 xhci-hcd [ 1.058725] usb usb1: SerialNumber: fe9c0000.xhci [ 1.059004] hub 1-0:1.0: USB hub found [ 1.059039] hub 1-0:1.0: 1 port detected [ 1.059260] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.059352] dwc_otg: FIQ enabled [ 1.059356] dwc_otg: NAK holdoff enabled [ 1.059359] dwc_otg: FIQ split-transaction FSM enabled [ 1.059363] Module dwc_common_port init [ 1.059711] usbcore: registered new interface driver uas [ 1.059762] usbcore: registered new interface driver usb-storage [ 1.060016] mousedev: PS/2 mouse device common for all mice [ 1.061565] sdhci: Secure Digital Host Controller Interface driver [ 1.061606] sdhci: Copyright(c) Pierre Ossman [ 1.061717] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.061916] hid: raw HID events driver (C) Jiri Kosina [ 1.061975] usbcore: registered new interface driver usbhid [ 1.061998] usbhid: USB HID core driver [ 1.062076] bcm2835_vchiq fe00b840.mailbox: there is not valid maps for state default [ 1.066407] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 (0,8000003f) counters available [ 1.067103] NET: Registered PF_PACKET protocol family [ 1.067178] Key type dns_resolver registered [ 1.078425] registered taskstats version 1 [ 1.079788] Loading compiled-in X.509 certificates [ 1.085156] Demotion targets for Node 0: null [ 1.086881] Key type .fscrypt registered [ 1.088048] Key type fscrypt-provisioning registered [ 1.093132] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.094531] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.095853] fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev3 [ 1.097147] serial serial0: tty port ttyAMA1 registered [ 1.099575] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.101276] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.102887] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.104053] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.131935] of_cfs_init [ 1.133231] of_cfs_init: OK [ 1.134583] clk: Disabling unused clocks [ 1.135931] PM: genpd: Disabling unused power domains [ 1.174404] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.181002] Freeing unused kernel memory: 5184K [ 1.182334] Run /init as init process [ 1.183498] with arguments: [ 1.183500] /init [ 1.183503] with environment: [ 1.183505] HOME=/ [ 1.183508] TERM=linux [ 1.232789] mmc0: new DDR MMC card at address 0001 [ 1.234800] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB [ 1.237743] mmcblk0: p1 p2 [ 1.239439] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB [ 1.241274] mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB [ 1.243979] mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB [ 1.246531] mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (243:0) [ 1.312170] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.355060] mmc1: Failed to initialize a non-removable card [ 1.448302] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 1.451701] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.507065] hub 1-1:1.0: USB hub found [ 1.509527] hub 1-1:1.0: 4 ports detected [ 1.525888] Console: switching to colour dummy device 80x25 [ 1.567975] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 1.572436] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 1.574877] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 1.713564] EXT4-fs (mmcblk0p2): mounted filesystem d4cc7d63-da78-48ad-9bdd-64ffbba449a8 ro with ordered data mode. Quota mode: none. [ 1.948835] systemd[1]: System time before build time, advancing clock. [ 2.021560] NET: Registered PF_INET6 protocol family [ 2.022368] Segment Routing with IPv6 [ 2.022398] In-situ OAM (IOAM) with IPv6 [ 2.054188] systemd[1]: systemd 252.36-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 2.054245] systemd[1]: Detected architecture arm64. [ 2.058284] systemd[1]: Hostname set to . [ 2.363773] systemd[1]: Queued start job for default target multi-user.target. [ 2.405464] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 2.406290] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 2.406898] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 2.407318] systemd[1]: Created slice user.slice - User and Session Slice. [ 2.407545] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 2.407734] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 2.408276] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 2.408443] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-de2270b9\x2d01.device - /dev/disk/by-partuuid/de2270b9-01... [ 2.408563] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 2.408687] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 2.408848] systemd[1]: Reached target paths.target - Path Units. [ 2.408991] systemd[1]: Reached target slices.target - Slice Units. [ 2.409125] systemd[1]: Reached target swap.target - Swaps. [ 2.409254] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 2.409642] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 2.409875] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 2.410525] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 2.410915] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 2.411281] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 2.411711] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 2.411996] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 2.412409] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 2.414095] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 2.416451] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 2.419178] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 2.419840] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 2.424566] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 2.427098] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 2.429954] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 2.435053] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 2.439097] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 2.442146] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 2.446550] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 2.450716] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 2.456544] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 2.457891] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 2.462944] systemd[1]: Starting systemd-journald.service - Journal Service... [ 2.468089] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 2.471562] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.472411] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 2.477121] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 2.482524] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 2.483271] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 2.483990] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 2.486939] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 2.491194] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 2.493238] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 2.493798] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 2.495186] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 2.495629] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 2.497210] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 2.497849] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 2.498921] fuse: init (API version 7.41) [ 2.499142] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 2.499750] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 2.505251] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 2.505691] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 2.514606] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 2.515237] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 2.516477] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 2.521271] EXT4-fs (mmcblk0p2): re-mounted d4cc7d63-da78-48ad-9bdd-64ffbba449a8 r/w. Quota mode: none. [ 2.540514] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 2.542780] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 2.543175] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 2.546276] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 2.556244] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 2.559106] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 2.559532] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 2.559654] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 2.562536] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 2.567800] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 2.568908] systemd[1]: Started systemd-journald.service - Journal Service. [ 2.605468] systemd-journald[242]: Received client request to flush runtime journal. [ 3.047899] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 3.104299] mc: Linux media interface: v0.10 [ 3.130052] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.142295] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 3.153856] rpi-gpiomem fe200000.gpiomem: window base 0xfe200000 size 0x00001000 [ 3.155664] rpi-gpiomem fe200000.gpiomem: initialised 1 regions as /dev/gpiomem [ 3.157092] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 3.165377] v3d fec00000.v3d: [drm] Transparent Hugepage support is recommended for optimal performance on this platform! [ 3.180617] videodev: Linux video capture interface: v2.00 [ 3.189499] [drm] Initialized v3d 1.0.0 for fec00000.v3d on minor 0 [ 3.189899] libata version 3.00 loaded. [ 3.193199] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 3.209808] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 3.211217] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 3.211665] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 3.220403] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 3.222837] Registered IR keymap rc-cec [ 3.222946] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 3.223085] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [ 3.235351] ahci 0000:01:00.0: version 3.0 [ 3.235416] ahci 0000:01:00.0: enabling device (0000 -> 0002) [ 3.238466] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/fef00700.hdmi/sound/card0/input1 [ 3.238753] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 3.240334] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 3.244534] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 3.244554] [vc_sm_connected_init]: start [ 3.247764] [vc_sm_connected_init]: installed successfully [ 3.250811] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.251675] ahci 0000:01:00.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode [ 3.251706] ahci 0000:01:00.0: 20/24 ports implemented (port mask 0xffff0f) [ 3.251711] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst [ 3.260249] Registered IR keymap rc-cec [ 3.260377] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 3.260486] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input2 [ 3.260667] rpi-hevc-dec feb00000.codec: Device registered as /dev/video19 [ 3.266050] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/fef05700.hdmi/sound/card1/input3 [ 3.266331] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 3.266653] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 3.266948] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.267144] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.267301] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.267391] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.267569] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.271380] [drm] Initialized vc4 0.0.0 for gpu on minor 1 [ 3.276027] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 3.288538] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 3.288743] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 3.320493] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 3.320528] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 3.320793] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 3.322878] vc4-drm gpu: [drm] The core clock cannot reach frequencies high enough to support 4k @ 60Hz. [ 3.322898] vc4-drm gpu: [drm] Please change your config.txt file to add hdmi_enable_4kp60. [ 3.326348] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 3.326777] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 3.327871] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 3.327908] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 3.332155] Bluetooth: Core ver 2.22 [ 3.332230] NET: Registered PF_BLUETOOTH protocol family [ 3.332235] Bluetooth: HCI device and connection manager initialized [ 3.332260] Bluetooth: HCI socket layer initialized [ 3.332267] Bluetooth: L2CAP socket layer initialized [ 3.332278] Bluetooth: SCO socket layer initialized [ 3.332659] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 3.332695] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 3.332705] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 3.332711] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 3.332715] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 3.338425] scsi host0: ahci [ 3.339828] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 3.339968] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 3.339987] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 3.340360] scsi host1: ahci [ 3.341016] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 3.341296] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 3.341482] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 3.341499] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 3.341510] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 3.341515] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 3.341519] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 3.341625] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 3.344242] scsi host2: ahci [ 3.344847] scsi host3: ahci [ 3.345502] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 3.345525] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 3.348290] scsi host4: ahci [ 3.353453] scsi host5: ahci [ 3.356242] Console: switching to colour frame buffer device 240x67 [ 3.356597] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 3.356623] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 3.357121] scsi host6: ahci [ 3.360261] scsi host7: ahci [ 3.370605] scsi host8: ahci [ 3.371039] scsi host9: ahci [ 3.372946] Bluetooth: HCI UART driver ver 2.3 [ 3.372962] Bluetooth: HCI UART protocol H4 registered [ 3.373040] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 3.374686] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 3.374814] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 3.374918] Bluetooth: HCI UART protocol Broadcom registered [ 3.375010] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 3.376619] scsi host10: ahci [ 3.384236] scsi host11: ahci [ 3.388728] scsi host12: ahci [ 3.392382] scsi host13: ahci [ 3.392991] scsi host14: ahci [ 3.395493] scsi host15: ahci [ 3.395872] scsi host16: ahci [ 3.400390] scsi host17: ahci [ 3.401199] scsi host18: ahci [ 3.402596] scsi host19: ahci [ 3.403999] scsi host20: ahci [ 3.408634] scsi host21: ahci [ 3.416270] scsi host22: ahci [ 3.420788] scsi host23: ahci [ 3.421013] ata1: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082100 irq 44 lpm-pol 0 [ 3.421042] ata2: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082180 irq 44 lpm-pol 0 [ 3.421071] ata3: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082200 irq 44 lpm-pol 0 [ 3.421078] ata4: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082280 irq 44 lpm-pol 0 [ 3.421082] ata5: DUMMY [ 3.421085] ata6: DUMMY [ 3.421088] ata7: DUMMY [ 3.421090] ata8: DUMMY [ 3.421109] ata9: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082500 irq 44 lpm-pol 0 [ 3.421114] ata10: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082580 irq 44 lpm-pol 0 [ 3.421121] ata11: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082600 irq 44 lpm-pol 0 [ 3.421128] ata12: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082680 irq 44 lpm-pol 0 [ 3.421136] ata13: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082700 irq 44 lpm-pol 0 [ 3.421140] ata14: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082780 irq 44 lpm-pol 0 [ 3.421145] ata15: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082800 irq 44 lpm-pol 0 [ 3.421149] ata16: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082880 irq 44 lpm-pol 0 [ 3.421154] ata17: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082900 irq 44 lpm-pol 0 [ 3.421159] ata18: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082980 irq 44 lpm-pol 0 [ 3.421165] ata19: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082a00 irq 44 lpm-pol 0 [ 3.421170] ata20: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082a80 irq 44 lpm-pol 0 [ 3.421177] ata21: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082b00 irq 44 lpm-pol 0 [ 3.421184] ata22: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082b80 irq 44 lpm-pol 0 [ 3.421191] ata23: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082c00 irq 44 lpm-pol 0 [ 3.421196] ata24: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082c80 irq 44 lpm-pol 0 [ 5.632117] Bluetooth: hci0: command 0xfc18 tx timeout [ 5.632146] Bluetooth: hci0: BCM: failed to write update baudrate (-110) [ 5.632152] Bluetooth: hci0: Failed to set baudrate [ 5.808127] ata1: found unknown device (class 0) [ 5.808165] ata1: SATA link down (SStatus 0 SControl 300) [ 6.676137] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.676697] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 6.676995] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 6.677660] ata2.00: configured for UDMA/133 [ 6.677949] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 6.678910] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 6.678925] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 6.678950] sd 1:0:0:0: [sda] Write Protect is off [ 6.678957] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.678992] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.679056] sd 1:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 6.734527] sda: sda1 [ 6.734756] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.986689] ata3: SATA link down (SStatus 0 SControl 300) [ 7.294673] ata4: SATA link down (SStatus 0 SControl 300) [ 7.602676] ata9: SATA link down (SStatus 0 SControl 300) [ 7.648112] Bluetooth: hci0: command 0xfc18 tx timeout [ 7.648130] Bluetooth: hci0: BCM: Reset failed (-110) [ 7.922669] ata10: SATA link down (SStatus 0 SControl 300) [ 8.230667] ata11: SATA link down (SStatus 0 SControl 300) [ 8.538670] ata12: SATA link down (SStatus 0 SControl 300) [ 8.846669] ata13: SATA link down (SStatus 0 SControl 300) [ 9.154667] ata14: SATA link down (SStatus 0 SControl 300) [ 9.466674] ata15: SATA link down (SStatus 0 SControl 300) [ 9.774670] ata16: SATA link down (SStatus 0 SControl 300) [ 10.082664] ata17: SATA link down (SStatus 0 SControl 300) [ 10.402666] ata18: SATA link down (SStatus 0 SControl 300) [ 10.710667] ata19: SATA link down (SStatus 0 SControl 300) [ 11.018668] ata20: SATA link down (SStatus 0 SControl 300) [ 11.326666] ata21: SATA link down (SStatus 0 SControl 300) [ 11.638666] ata22: SATA link down (SStatus 0 SControl 300) [ 11.946672] ata23: SATA link down (SStatus 0 SControl 300) [ 12.254668] ata24: SATA link down (SStatus 0 SControl 300) [ 12.370662] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 12.646846] Adding 524284k swap on /var/swap. Priority:-2 extents:11 across:3915776k SS [ 12.715651] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.715666] Bluetooth: BNEP filters: protocol multicast [ 12.715688] Bluetooth: BNEP socket layer initialized [ 13.152064] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 13.153118] bcmgenet fd580000.ethernet eth0: Link is Down [ 26.464580] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx