smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.17.0-14-generic] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST12000NM0127 Serial Number: ZJV1CY24 LU WWN Device Id: 5 000c50 0b1965862 Firmware Version: G006 User Capacity: 12,000,138,625,024 bytes [12.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jul 9 15:16:41 2026 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 567) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: (1068) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 079 064 044 Pre-fail Always - 84708904 3 Spin_Up_Time 0x0003 090 089 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 406 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 083 060 045 Pre-fail Always - 179070714 9 Power_On_Hours 0x0032 037 037 000 Old_age Always - 55867 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 119 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 072 045 040 Old_age Always - 28 (Min/Max 25/37) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 919 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2615 194 Temperature_Celsius 0x0022 028 055 000 Old_age Always - 28 (0 17 0 0 0) 195 Hardware_ECC_Recovered 0x001a 006 001 000 Old_age Always - 84708904 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 54411 (239 166 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3366232234649 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 4317883037347 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 36010 - # 2 Short captive Completed without error 00% 36010 - # 3 Short captive Completed without error 00% 36007 - # 4 Vendor (0x70) Completed without error 00% 35938 - # 5 Vendor (0x71) Completed without error 00% 35938 - # 6 Vendor (0x70) Completed without error 00% 34832 - # 7 Vendor (0x71) Completed without error 00% 34831 - # 8 Short offline Completed without error 00% 34831 - # 9 Vendor (0x70) Completed without error 00% 34760 - #10 Vendor (0x71) Completed without error 00% 34760 - #11 Short offline Completed without error 00% 34760 - #12 Vendor (0x70) Completed without error 00% 34715 - #13 Vendor (0x71) Completed without error 00% 34715 - #14 Short offline Completed without error 00% 34715 - #15 Vendor (0x70) Completed without error 00% 34642 - #16 Vendor (0x71) Completed without error 00% 34642 - #17 Short offline Completed without error 00% 34642 - #18 Vendor (0x70) Completed without error 00% 34564 - #19 Vendor (0x71) Completed without error 00% 34564 - #20 Short offline Completed without error 00% 34564 - #21 Vendor (0x70) Completed without error 00% 30206 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more